HD-DCS MTP module, 1x MTP on 6x LCD/APC, OS2

for HD-DCS modular panels

Product variants & stock

Article No. Stock ProductOuter dimensions (HxWxD)ColourMaterialWeight [kg]Packing unitGTIN / EAN
HD-DCS MTP module, 1x MTP on 6x LCD/APC, OS213 mm x 88 mm x 118 mmblackPolycarbonate (PC)0.08 kg1 pc.40393910145359

Technical specifications

Polycarbonate (PC) housing with press-fit cover (sealed). At the rear these HD-DCS modules have one MTP coupler which is routed to the front couplers (6LCD) by way of an internal fanout. Front couplers with integrated, automatic transparent dust shutters.
System HD-DCS
Fully equipped yes
Acceptance capacity 12 fibres
Fibre colour code IEC 60304
Adapter, front side 1 x 6LCD, green
Adapter material, front side Polymeric
Dust protection, front side yes
Laser protection, front side no
Dust/Laser protection, front side Inner shutter, translucent
Sleeve material, front side Zirconia (ZrO2)
Connectors, front side 12 x LC/APC 8°
Ferrule material, front side Zirconia (ZrO2)
Adapter, rear side 1 x MTP, green, Type A (key up/key down)
Adapter material, rear side Polythermide
Adapter type, rear side Type A (key up/key down)
Dust protection, rear side yes
Laser protection, rear side yes
Dust/Laser protection, rear side Dust plug
Connectors, rear side 1 x MTP12 female Elite APC 8°
Ferrule material, rear side Polyphenylene sulfide resin
Housing, equipped with 1x 6LCD adapter with automatic transparent dust protection caps and ceramic sleeves on the front.
Rear fitted with 1 MTP adapter (Type A).
1 module fanout (HighP): with 12 fibres, 1x MTP Elite® (female) on 12x LC (ceramic ferrules).
HD-DCS MTP® modules are suitable for all high-density and high-performance applications with duplex signals, particularly in the data centre environment.
They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front.
They are used to accept pre-assembled MTP trunk cables.
Packing densities of up to 144 fibres on 1U are achieved with these modules.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS LCD Uniboot patch cables with push-pull rods.
Insertion loss (IL), maximal, front side 0.25 dB
Insertion loss (IL), typical, front side 0.12 dB
Return loss (RL), minimal, front side 65 dB
Return loss (RL), typical, front side 70 dB
Insertion loss (IL), maximal, rear side 0.30 dB
Insertion loss (IL), typical, rear side 0.15 dB
Return loss (RL), minimal, back side 65 dB
Return loss (RL), typical, back side 70 dB
Fibre type E9/125 G.652.D BLO
LC standard (IEC) IEC 61754-20
MTP standard (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32