Contact us
CU_7080_4P.jpg
CU_duplex

CU 7080 4P / 2x4P F8

Data cable, S/FTP, Category 7, AWG23, Euroclass Dca
1000 MHz

1 Inner Conductor: AWG23 Bare copper wire
2 PE insulated conductor: 1.4 Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH

01_RoHS 04_Propagation 05_Spread 10_Schielded_EN 06_Density 08_System- 03_LS0H CPR_Dca CPR_Eca Piktogramm_4PPoE_PL89m.jpg

Product variants & stock

Article No. Stock ProductReaction to fireDimensions n x p x [mm (AWG)]Outer sheath dimensions [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Packing unitGTIN / EAN
18291100DK
CU 7080 4PDca-s2,d1,a14 x 2 x 0.57 (AWG23)7.031.150.90.1211000 m drum40393910040791
18291100DL
CU 7080 4PDca-s2,d1,a14 x 2 x 0.57 (AWG23)7.031.150.90.121500 m drum40393910040784
18291200DL
CU 7080 2x4PDca-s2,d1,a12 x (4 x 2 x 0.57 (AWG23))7.2 x 15.462.2113.60.32500 m drum40393910040678

Technical specifications

Electrically and mechanically superior quality Cat.7 data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-4-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Minimum bending radius (during installation) 60 mm
Tensile strength (2x4P) 220 N
Tensile strength (4P) 110 N
Minimum number of impacts 10
Minimal crush resistance / 10cm 1000 N
AWG 23
Solid / Flex Solid wire
Minimum bending radius (permanently installed) 30 mm
Data cable for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
Applicable for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W.
Category Cat.7
GBit/s Up to 10 Gbit/s
Loop resistance at 20 °C 140 Ω/km
Operating capacity 42 pF/m
Impedance at 100 MHz, ±5Ω 100 Ω
NVP % 81
Delay skew 12 ns/100 m
Shielding shielded
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Transfer impedance 1/10/30 MHz < 6/6/10 mΩ/m
Coupling attenuation 85 dB
Segregation class d
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Wire colour white/blue, white/orange, white/green, white/brown, according to IEC 60189 and IEC 60708
Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
Field of application Indoor
Reaction to fire EN 13501-6
Euroclass Dca
Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1
Flame spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2
Cables standard ISO/IEC 61156-5, EN 50288-4-1
Cat./Class Cat.7 / Class F
PoE IEEE 802.3bt Type 4 (100W)
Outer sheath material FRNC/LSZH
Outer sheath colour orange

Documentation