Insulation bridging set
for insulated ceilings, thickness >100 mm
Example for bridging set:
1 Mounting screw
2 Joint
3 Threaded rod
4 Nuts
Product variants & stock
Download
| Article No. | Stock | Product | Weight [kg] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|
| 4000738 | Ü-Set 400 mm | 11.6 kg | 100 sets | 40393910211054 |
Technical specifications
Bridging set for mounting Datwyler clamps on insulated ceilings - insulation thickness: higher than 100 mm. Borehole depth = x+y.
Embedment depth in concrete (x): minimum of 70 mm,
plus thickness of non-flammable insulation (y).
Embedment depth in concrete (x): minimum of 70 mm,
plus thickness of non-flammable insulation (y).
| The suspensions take 0.15 kN for fire resistance F90. |
| Threaded rods delivered 0,5 m or 1 m in length - must be cut to the requested length (y = thickness of insulation). A thread cutting device which causes no flying sparks and provides a stop for equal lengths is available from specialised retailers. Maybe the plasterboarder can help you, too. You can use a 6 mm drill and mounting tools from specialised retailers. Bridging Set is also suitable for >400 mm. Threaded rod must be cut accordingly. A dril for borehole depths >400 mm is necessary! |