HD-DCS MTP module, 1x MTPD on 12x LCD/PC, OM3

for HD-DCS modular panels

Product variants & stock

Article No. Stock ProductOuter dimensions (HxWxD)ColourMaterialPacking unitGTIN / EAN
HD-DCS MTP modules, 1x MTPD on 12x LCD/PC, OM339 mm x 100 mm x 120 mmblackPolycarbonate (PC)1 pc.40393910215083

Technical specifications

Polycarbonate (PC) housing with press-fit cover (sealed). At the rear these HD-DCS modules have one MTPD (duplex) coupler which is routed to the front couplers (2x 6LCD) by way of internal fanouts. Front couplers with integrated, automatic transparent dust shutters.
System HD-DCS
Fully equipped yes
Acceptance capacity 24 fibres
Fibre colour code IEC 60304
Adapter, front side 2 x 6LCD, turquoise
Adapter material, front side Polymeric
Dust protection, front side yes
Laser protection, front side no
Dust/Laser protection, front side Inner shutter, translucent
Sleeve material, front side Zirconia (ZrO2)
Connectors, front side 24 x LC/PC 0°
Ferrule material, front side Zirconia (ZrO2)
Adapter, rear side 1 x MTPD, turquoise, Type A (key up/key down)
Adapter material, rear side Polythermide
Adapter type, rear side Type A (key up/key down)
Dust protection, rear side yes
Laser protection, rear side yes
Dust/Laser protection, rear side Dust plug
Connectors, rear side 2 x MTP12 female Elite PC 0°
Ferrule material, rear side Polyphenylene sulfide resin
Housing, equipped with 2x 6LCD adapters with automatic transparent dust protection caps and ceramic sleeves on the front.
Rear fitted with 1 MTPD adapters (Type A).
2 module fanouts (HighP): each with 12 fibres, 1x MTP Elite® (female) on 12x LC (ceramic ferrules).
HD-DCS MTP® modules are suitable for all high-density and high-performance applications with duplex signals, particularly in the data centre environment.
They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front and the back.
They are used to accept pre-assembled MTP trunk cables.
Packing densities of up to 96 fibres on 1U are achieved with these modules.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS LCD Uniboot patch cables with push-pull rods.
Insertion loss (IL), maximal, front side 0.25 dB
Insertion loss (IL), typical, front side 0.15 dB
Return loss (RL), minimal, front side 35 dB
Return loss (RL), typical, front side 40 dB
Insertion loss (IL), maximal, rear side 0.25 dB
Insertion loss (IL), typical, rear side 0.15 dB
Return loss (RL), minimal, back side 35 dB
Return loss (RL), typical, back side 45 dB
Fibre type G50/125 OM3
LC standard (IEC) IEC 61754-20
MTP standard (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32