Contact us

FO duplex patch cord LCD/PC - LCD/PC

E9/125 G.652.D BLO, Duplex Fig. 8 (B2ca)

image similar

Technical specifications

Datwyler offers a broad range of terminated connectors for individual customer needs. A cable with Euroclass B2<sub>ca</sub>-s2,d1,a1 is used for the assembly.
Connector cable retention 100
Tensile load (IEC 60794-1-21 E1 0,33% reversible fibre elongation) 200 N
Bending (IEC 60794-1-21 E11, reversible fibre attenuation) ≤ 0,5 dB
Crush resistance (IEC 60794-1-21 E3, reversible fibre attenuation) ≤ 0,2 dB
Torsion (IEC 60794-1-21 E7, reversible fibre attenuation) ≤ 0,1 dB
Minimum bending radius 50 mm
Cable raw material FO Indoor Duplex Figure 8 / I-V(ZN)H, B2ca-s2,d1,a1
Operating temperature -10 °C - +60 °C
Reproducibility of the IL a maximum of +/- 0.1dB
Lifetime 1000 connections with stable attenuation values
Fibre type E9/125 G.652.D BLO
Ferrule material Zirconia
Connector type side A LCD/PC
IL maximal, connector A 0.25 dB
IL typical, connector A 0.12 dB
RL minimal, connector A 50 dB
RL typical, connector A 55 dB
Grade IEC61755, connector A (better than) B2
Standard connector A IEC 61754-20
Connector type side B LCD/PC
IL maximal, connector B 0.25 dB
IL typical, connector B 0.12 dB
RL minimal, connector B 50 dB
RL typical, connector B 55 dB
Grade IEC61755, connector B (better than) B2
Standard connector B IEC 61754-20
Cable Duplex Fig. 8 (B2ca)
Cable construction I-V(ZN)H (4.1 x 2.0mm)
Outer sheath material FRNC/LSZH
Outer sheath colour yellow
Impact IEC 60794-1-21 E4
Repeated bending IEC 60794-1-21 E6

Documentation