CU 7702 4P flex SHF1

Flexible data cable, S/FTP, Category 7, AWG26, Euroclass Dca
862 MHz

1 Inner conductor: AWG26, bare copper wire, stranded
2 PE insulated conductor: Ø 0.99 mm
3 Screen (pair): Alu PETP foil
4 Overall screen: tinned braided copper
5 Outer sheath: FRNC/LS0H SHF1

01_RoHS 04_Propagation 05_Spread- 02_PoE 10_Schielded_EN 06_Density- 08_System- 03_LS0H- CPR_Dca_sw CPR_Eca

Product variants & stock

Article No. Stock ProductReaction to fireDimensions n x p x [mm (AWG)]Outer sheath dimensions [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Packing unitGTIN / EAN
CU 7702 4P FLEX SHF1Dca-s1a,d2,a14 x 2 x 0.132 (AWG26)6.418.1450.1381000 m drum40393910022254

Technical specifications

Electrically and mechanically superior quality Cat.7 patch cord - exceeds the requirements of ISO/IEC 11801, IEC 61156-6, EN 50173-1 and EN 50288-4-2. Excellent shielding effect due to individually screened pairs and overall copper braid. Easy wire identification and termination due to different coloured wires. Compatible with all current connecting hardware in accordance with EN 50173, ISO/IEC 11801 and IEC 60603-7. Oil resistant, fire retardant and halogen free sheath. Certified by Det Norske Veritas.
AWG 26
Repeated bending 1000 cycles
Tensile strength (4P) 56 N
Minimal crush resistance / 10cm 600 N
Minimum number of impacts 10
Solid / Flex Stranded wire (flexible)
Minimum bending radius 25.6 mm
As patch cord in patch panels and as equipment connection cable, especially suitable for CP (Consolidation Point) applications.
Designed for use in industrial areas, particularly for higher requirements in offshore and marine applications.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Optimized for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
Applicable for Power over Ethernet (PoE) / PoE+.
Versiones FRNC / LS0H disponibles
Category Cat.7
GBit/s Up to 10 Gbit/s
Loop resistance at 20 °C 270 Ω/km
Operating capacity 43 pF/m
Impedance at 100 MHz, ±5Ω 100 Ω
NVP % 78
Delay skew 4 ns/100 m
Shielding shielded
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Transfer impedance 10 mΩ/m
Coupling attenuation 70 dB
Segregation class c
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Wire colour white/blue, red/orange, black/green, yellow/brown, according to IEC 60189 and IEC 60708
Imprint DATWYLER CU 7702 4P FLEX AWG26 S/FTP CAT 7 IEC SHF1 NVP78% - DNVGL-CP-0403 - IEC 61156-6 <CPRClass> MADE IN SWITZERLAND <Lot-number> <length marking> M
Field of application Off-Shore and Shipbuilding
Reaction to fire EN 13501-6
Euroclass Dca
Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
Cables standard ISO/IEC 61156-6, EN 50288-4-2
Cat./Class Cat.7 / Class F
DNV standard DNVGL-CP-0403
PoE IEEE 802.3af
Outer sheath material FRNC/LSZH SHF1
Outer sheath colour grey