Contact us
CU_7120_4P
CU_duplex

CU 7120 4P / 2x4P F8

Data cable, S/FTP, Category 7A, AWG 22, Euroclass Dca
1300 MHz

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.5 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH

01_RoHS 04_Propagation 05_Spread 02_PoEp_rt 10_Schielded_EN 06_Density 08_System- 03_LS0H CPR_Dca CPR_Eca

Product variants & stock

Article No. Stock ProductReaction to fireDimensions n x p x [mm (AWG)]Outer sheath dimensions [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Packing unitGTIN / EAN
19146600DK
CU 7120 4PDca-s2,d1,a14 x 2 x 0.59 (AWG22)7.332.355.90.1541000 m drum40393910030532
19146600DL
CU 7120 4PDca-s2,d1,a14 x 2 x 0.59 (AWG22)7.332.355.90.154500 m drum40393910030525
19146700DL
CU 7120 2x4PDca-s2,d1,a12 x (4 x 2 x 0.59 (AWG22))7.6 x 16.064.61240.36500 m drum40393910030464

Technical specifications

Electrically and mechanically advanced quality Cat.7A data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Reduced outer diameter.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Minimum bending radius (during installation) 60 mm
Tensile strength (2x4P) 220 N
Tensile strength (4P) 110 N
Minimum number of impacts 10
Minimal crush resistance / 10cm 1000 N
AWG 22
Solid / Flex Solid wire
Minimum bending radius (permanently installed) 30 mm
Data cable for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the transmission of broadband signals (such as cable TV) in accordance with ISO/IEC 11801-4.
Applicable for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W.
Category Cat.7A
GBit/s Up to 10 Gbit/s
Loop resistance at 20 °C 131 Ω/km
Operating capacity 44 pF/m
Impedance at 100 MHz, ±5Ω 100 Ω
NVP % 76
Delay skew 14 ns/100 m
Shielding shielded
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Transfer impedance 1/10/30 MHz < 5/5/8 mΩ/m
Coupling attenuation 85 dB
Segregation class d
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Wire colour white/blue, white/orange, white/green, white/brown, according to IEC 60189 and IEC 60708
Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
Field of application Indoor
Reaction to fire EN 13501-6
Euroclass Dca
Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1
Flame spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2
Cables standard ISO/IEC 61156-5, EN 50288-9-1
Conductor Diameter (AWG) according to UL444, table 5
Cat./Class Cat.7A / Class FA
PoE IEEE 802.3bt Type 4 (100W)
Outer sheath material FRNC/LSZH
Outer sheath colour orange

Documentation