1 Inner conductor: AWG26, bare copper wire, stranded
2 PE insulated conductor: Ø 0.99 mm
3 Screen (pair): Alu PETP foil
4 Overall screen: tinned braided copper
5 Outer sheath: FRNC/LS0H SHF1
Product variants & stock
Article No.
Stock
Product
Reaction to fire
Dimensions n x p x [mm (AWG)]
Outer sheath dimensions [mm]
CU rate [kg/km]
Weight [kg/km]
Fire load [kWh/m]
Packing unit
GTIN / EAN
19439301DK
CU 7702 4P FLEX SHF1
Dca-s1a,d2,a1
4 x 2 x 0.132 (AWG26)
6.4
18.1
45
0.138
1000 m drum
40393910022254
Technical specifications
Electrically and mechanically superior quality Cat.7 patch cord - exceeds the requirements of ISO/IEC 11801, IEC 61156-6, EN 50173-1 and EN 50288-4-2.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy wire identification and termination due to different coloured wires.
Compatible with all current connecting hardware in accordance with EN 50173, ISO/IEC 11801 and IEC 60603-7.
Oil resistant, fire retardant and halogen free sheath.
Certified by Det Norske Veritas.
AWG
26
Repeated bending
1000 cycles
Tensile strength (4P)
56
Minimal crush resistance / 10cm
600
Minimum number of impacts
10
Solid / Flex
Stranded wire (flexible)
Minimum bending radius
25.6
Segregation class
c
Category
Cat.7
Loop resistance at 20 °C
270
Operating capacity
43
Transfer impedance
10
Delay skew
4
Impedance at 100 MHz, ±5Ω
100
Near end unbalance attenuation LCL at 1-600 MHz
40
NVP %
78
Coupling attenuation
70
GBit/s
Up to 10 Gbit/s
Shielding
shielded
Keyfeatures
862 MHz
Application
As patch cord in patch panels and as equipment connection cable, especially suitable for CP (Consolidation Point) applications.
Designed for use in industrial areas, particularly for higher requirements in offshore and marine applications.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Optimized for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
Applicable for Power over Ethernet (PoE) / PoE+.
Wire colour
white/blue, red/orange, black/green, yellow/brown, according to IEC 60189 and IEC 60708
Field of application
Off-Shore and Shipbuilding
Installation temperature
0 °C - +50 °C
Operating temperature
-20 °C - +60 °C
Imprint
DATWYLER CU 7702 4P FLEX AWG26 S/FTP CAT 7 IEC SHF1 NVP78% - DNVGL-CP-0403 - IEC 61156-6 <CPRClass> MADE IN SWITZERLAND <Lot-number> <length marking> M
Note
Versiones FRNC / LS0H disponibles
Reaction to fire
EN 13501-6
Euroclass
Dca
Smoke density
IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
Zero halogen no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
Flame propagation
IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1