Back to: Copper cables

CU 7702 4P flex SHF1

Flexible data cable, S/FTP, Category 7, AWG26, Euroclass Dca

1 Inner conductor: AWG26, bare copper wire, stranded
2 PE insulated conductor: Ø 0.99 mm
3 Screen (pair): Alu PETP foil
4 Overall screen: tinned braided copper
5 Outer sheath: FRNC/LS0H SHF1

Description

Electrically and mechanically superior quality Cat.7 patch cord – exceeds the requirements of ISO/IEC 11801, IEC 61156-6, EN 50173-1 and EN 50288-4-2.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy wire identification and termination due to different coloured wires.
Compatible with all current connecting hardware in accordance with EN 50173, ISO/IEC 11801 and IEC 60603-7.
Oil resistant, fire retardant and halogen free sheath.
Certified by Det Norske Veritas.

  • As patch cord in patch panels and as equipment connection cable, especially suitable for CP (Consolidation Point) applications.
    Designed for use in industrial areas, particularly for higher requirements in offshore and marine applications.
    For the transmission of digital and analogue voice, video and data signals.
    Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
    Optimized for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
    Applicable for Power over Ethernet (PoE) / PoE+.
  • Category Cat.7
  • Coupling attenuation 70 dB
  • Delay Skew 4 ns/100 m
  • Shielding shielded
  • GBit\s Up to 10 Gbit/s
  • Impedance at 100 MHz, ±5Ω 100 Ω
  • Loop resistance at 20°C 270 Ω/km
  • Near end unbalance attenuation LCL at 1-600 MHz 40 dB
  • NVP % 78
  • operating capacity 43 pF/m
  • Transfer impedance 10 mΩ/m
  • Installation temperature 0 °C - +50 °C
  • Operating temperature -20 °C - +60 °C
  • Field of application Off-Shore and Shipbuilding
  • Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
  • Wire colour white /blue, red/orange, black/green, yellow/brown, according to IEC 60189 and IEC 60708
  • Minimum bending radius 25.6 mm
  • AWG 26
  • Minimal crush resistance / 10cm 600 N
  • Minimum number of impacts 10
  • Solid / Flex Stranded wire (flexible)
  • Tensile strength (4P) 56 N
  • Repeated bending 1000 cycles
  • Reaction to fire (Euroclasses) EN 13501-6: Dca
  • Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
  • Flame Propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
  • Smoke Density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
  • Cat./Class Cat.7 / Class F
  • DNV standard DNVGL-CP-0403
  • PoE IEEE 802.3af

Documentation

ENDENLFRCNESITAT
Datasheet Datasheet Datasheet Datasheet Datasheet file-icon Datasheet Datasheet file-icon
DNV Certificate DNV Certificate file-icon file-icon file-icon file-icon file-icon file-icon file-icon

Versions

Article No.StockProductAWGCU rate (AT)Reaction To FireDimensions n x p x [mm (AWG)]Outer sheath colourNumber of pairsNumber of CoresDiameter mmOuter sheath materialOuter sheath diameter [mm]Weight [kg/km]Fire load [kWh/m]Number of cablesPacking unit
19439301DK CU 7702 4P FLEX SHF1AWG2618.1Dca-s1a,d2,a14 x 2 x 0.132 (AWG26)grey420.132 mmFRNC/LSZH SHF16.4 mm450.138 kWh/m11000 m drum