Back to: Copper cables

CU 7150 4P / 2x4P F8 Multimedia

Data cable, S/FTP, Category 7A, AWG22, Euroclass Cca

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.6 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH orange RAL 2003


Electrically and mechanically superior quality Cat.7A data cable – exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.

  • Data cable for structured premises cabling. For the transmission of digital and analogue voice, video and data signals.
    Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
    Optimized for the transmission of broadband signals (such as cable TV) in accordance with ISO/IEC 11801-4.
    Due to the increased wire section eminently suited for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W. Fully supports the application of HDBaseT (TM) Spec 1.0 and Spec 2.0
  • Category Cat.7A
  • Coupling attenuation 85 dB
  • Delay Skew 17 ns/100 m
  • EMC shielded
  • GBit\s Up to 10 Gbit/s
  • Impedance at 100 MHz, ±5Ω 100 Ω
  • Loop resistance at 20°C 111 Ω/km
  • Near end unbalance attenuation LCL at 1-600 MHz 40 dB
  • NVP % 80
  • operating capacity 41 pF/m
  • Transfer impedance 1/10/30 MHz 5/5/8 mΩ/m
  • Installation temperature 0 °C - +50 °C
  • Operating temperature -20 °C - +60 °C
  • Circuit Integrity No
  • Field of application Indoor
  • Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
  • Wire colour white - blue/blue, white orange/orange, white green/green, white brown/brown in acc. with IEC 60189 and IEC 60708 (ring marked)
  • AWG 22
  • Minimum bending radius during installation 64 mm
  • Minimum bending radius permanently installed 32 mm
  • Minimal crush resistance / 10cm 1000 N
  • Minimum number of impacts 10
  • Solid / Flex Solid wire
  • Tensile strength (2x4P) 260 N
  • Tensile strength (4P) 130 N
  • Reaction to fire (Euroclasses) EN 13501-6: Cca
  • Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
  • Flame Propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
  • Flame Spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
  • Smoke Density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
  • Cat./Class Cat.7A / Class FA
  • PoE IEEE 802.3bt Type 4 (100W)


Datasheet Datasheet Datasheet Datasheet Datasheet file-icon Datasheet Datasheet
GHMT PM/Channel Certificates GHMT PM/Channel Certificates GHMT PM/Channel Certificates file-icon file-icon file-icon file-icon file-icon
GHMT PVP Certificates GHMT PVP Certificates GHMT PVP Certificates file-icon file-icon file-icon file-icon file-icon
GHMT Type Approval Certificate GHMT Type Approval Certificate GHMT Type Approval Certificate file-icon file-icon file-icon file-icon file-icon
Tender text Tender text Tender text Tender text Tender text file-icon file-icon file-icon
Transmission Parameter file-icon Transmission Parameter file-icon file-icon file-icon file-icon file-icon


Article No.StockProductNumber of pairsAWGFire load (MJ/m)Reaction To FireDimensions n x p x [mm (AWG)]Outer sheath colourNumber of CoresDiameter mmOuter sheath materialOuter sheath diameter [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Number of cablesPacking unit
18292500CK CU 7150 4P4AWG220.62 MJ/mCca-s1a,d1,a14 x 2 x 0.64 (AWG22)orange20.64 mmFRNC/LSZH7.840.2 kg/km650.18 kWh/m11000 m drum
18292600CL CU 7150 2x4P4AWG221.24 MJ/mCca-s1a,d1,a12 x (4 x 2 x 0.64 (AWG22))orange20.64 mmFRNC/LSZH1680.4 kg/km1310.36 kWh/m2500 m drum