Server Racks Standard DSRS

19"/42U
with perforated front and rear doors

Server Rack Standard DSRS, 42U, 800 x 1000 mm

Product variants & stock

Only show available stock

Article No.	Product	Height [U]	Height [mm]	Width [mm]	Depth [mm]	Colour	Weight [kg]	Packing unit	GTIN / EAN
195420	Server Rack Standard DSRS, 42 U, 1,987 x 600 x 1,000 mm	42	1987	600	1000	black	105 kg	1 pc.	40393910199628
195424	Server Rack Standard DSRS, 42 U, 1,987 x 600 x 1,200 mm	42	1987	600	1200	black	126 kg	1 pc.	40393910199581
195421	Server Rack Standard DSRS, 42 U, 1,987 x 800 x 1,000 mm	42	1987	800	1000	black	122 kg	1 pc.	40393910199611
195425	Server Rack Standard DSRS, 42 U, 1,987 x 800 x 1,200 mm	42	1987	800	1200	black	134.5 kg	1 pc.	40393910199574
195422	Server Rack Standard DSRS, 42 U, 1,987 x 600 x 1,000 mm	42	1987	600	1000	light grey	114 kg	1 pc.	40393910199604
195426	Server Rack Standard DSRS, 42 U, 1,987 x 600 x 1,200 mm	42	1987	600	1200	light grey	138.5 kg	1 pc.	40393910199567
195423	Server Rack Standard DSRS, 42 U, 1,987 x 800 x 1,000 mm	42	1987	800	1000	light grey	133 kg	1 pc.	40393910199598
195427	Server Rack Standard DSRS, 42 U, 1,987 x 800 x 1,200 mm	42	1987	800	1200	light grey	158 kg	1 pc.	40393910199550

Description

The Datwyler Server Racks Standard DSRS are designed to provide good-quality cabinets that offer an unrivaled cost-performance ratio.

Scope of delivery

Comes with 28 mounting kits (screws, cage nuts, washers).

Note

More dimensions available on request

Mechanical properties

Base frame	Welded sheet steel frame (1.5 mm)
Front door	One-piece perforated door, 86% perforation, with swivel handle lock, DIN profile, universal key 333, 1-point locking, up to 180° aperture angle. Front door can be hinged right or left (easy to change).
Rear door	One-piece perforated door, 86% perforation, with swivel handle lock, DIN profile, universal key 333, 1-point locking, up to 180° aperture angle. Can be hinged right or left (easy to change).
Side panels	Removable, locks with universal key
Top Panel	Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm)
Bottom panel	Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm)
Mounting profile	2 pairs of 19" vertical profiles (front / rear), stepless depth adjustment from inside, with U label; rack offers 3 vertical 19"/2U positions per 19" extrusion
Feet	Set of adjustable feet as standard
Earthing	pre-installed flat earthing kit
Protection class	IP20
Bayable	yes
Maximum load [KG]	1000 kg