Network Racks Standard DNRS
19″/42U
with glass front door
This product is not available in your region!
Network Rack Standard DNRS, 42U, 600 x 800 mm
Product variants & stock
Download
| Article No. | Stock | Product | Height [U] | Height [mm] | Width [mm] | Depth [mm] | Colour | Weight [kg] | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|
| 195300 | Network Rack Standard DNRS, 42 U, 2,000 x 800 x 800 mm | 42 | 2000 | 800 | 800 | light grey | 113 kg | 40393910200539 | |
| 195301 | Network Rack Standard DNRS, 42 U, 2,000 x 800 x 1,000 mm | 42 | 2000 | 800 | 1000 | light grey | 133 kg | 40393910200522 | |
| 195302 | Network Rack Standard DNRS, 42 U, 2,000 x 600 x 600 mm | 42 | 2000 | 600 | 600 | light grey | 83 kg | 40393910200515 | |
| 195303 | Network Rack Standard DNRS, 42 U, 2,000 x 600 x 800 mm | 42 | 2000 | 600 | 800 | light grey | 94 kg | 40393910200508 | |
| 195304 | Network Rack Standard DNRS, 42 U, 2,000 x 600 x 1,000 mm | 42 | 2000 | 600 | 1000 | light grey | 114 kg | 40393910200492 |
Technical specifications
The Datwyler Network Racks Standard DNRS are designed to provide good-quality cabinets that offer an unrivaled cost-performance ratio.
| Comes with 28 mounting kits (screws, cage nuts, washers). - plinth, 100 mm (4 corners, 4 panels and mounting kit) - cable entry, double brush strip panel with 300 x 100 opening - potential equalization bar 8 x 8 mm, 22 connection points, 40A, with mounting kit and earthing cable - cable mangement / cable tray, 1800 mm height |
| Base frame | Welded sheet steel frame (1.25 mm) |
|---|---|
| Front door | Tinted safety glass with swivel handle lock, DIN profile, universal key 333, 1-point locking, up to 180° aperture angle. Doors can be hinged right or left (easy to change). |
| Rear door | Sheet steel, removable, with removable blind plate for cable entry (300 x 100 mm), lock, universal key |
| Side panels | Removable, locks with universal key |
| Top panel | Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm). Ventilation: Via a covered 480 x 280 mm hole. |
| Bottom panel | Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm) |
| Mounting profile | 2 pairs of 19" vertical profiles, front / rear, stepless in depth adjustable from inside, with U label |
| Feet | Set of adjustable feet as standard |
| Earthing | pre-installed flat earthing kit |
| Protection class | IP30 |
| Bayable | yes |
| Maximum load [KG] | 500 kg |