Network Racks Premium DNRP
19"/42U and 47U
with glass front door & steel rear door,
RAL 7035 and RAL 9005
Product variants & stock
| Article No. | Stock | Product | Height [U] | Height [mm] | Width [mm] | Depth [mm] | Colour | Weight [kg] | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|
| 41972700ZY | Network Rack Premium DNRP | 42 | 2005 | 800 | 800 | grey | 134 kg | 40393910416497 | |
| 41972800ZY | Network Rack Premium DNRP | 42 | 2005 | 800 | 800 | black | 134 kg | 40393910416503 | |
| 41973100ZY | Network Rack Premium DNRP | 42 | 2005 | 800 | 1000 | grey | 150 kg | 40393910416534 | |
| 41973200ZY | Network Rack Premium DNRP | 42 | 2005 | 800 | 1000 | black | 150 kg | 40393910416541 | |
| 41973500ZY | Network Rack Premium DNRP | 47 | 2205 | 800 | 800 | grey | 173 kg | 40393910416572 | |
| 41973600ZY | Network Rack Premium DNRP | 47 | 2205 | 800 | 800 | grey | 173 kg | 40393910416589 |
Technical specifications
The Dätwyler Network Racks Premium (DNRP) are robust 19-inch network cabinets, available in heights of 42U and 47U.
They are equipped with a front door made of tinted safety glass and a sturdy steel rear door.
These racks are available in the colors RAL 7035 (light grey) and RAL 9005 (black).
They offer a maximum load capacity of up to 2,000 kilograms and can be stacked up to 108U.
With an appropriate extension, protection class IP54 can be achieved. Additional colors and configurations are available upon request.
| Comes with 28 mounting kits (screws, cage nuts, washers). Fully assembled and packed, including installation instructions. |
| These racks can achieve IP54 with the appropriate expansion and are stackable up to 108U. They are also available in heights of 27U and 52U. |
| The DNRP racks are ideal for use in data centers, technical rooms, and network rooms. They offer a solid and flexible solution for housing network devices and IT components. Thanks to their robust construction and high load capacity, they are well-suited for environments where reliable cooling, accessibility, and efficient cable management are required. Their modular design allows easy integration into existing IT infrastructures and adapts to the demands of modern technical environments. |
| Base frame | Welded, galvanised sheet steel frame (2.0 mm, partially 1.5 mm) |
|---|---|
| Front door | Tinted safety glass with swivel handle lock, DIN profile, universal key 333, 3-point locking, up to 180° aperture angle. Doors can be hinged right or left (easy to change). |
| Rear door | Sheet steel, non-perforated, with swivel handle lock, DIN profile, universal key 333, 3-point locking, up to 190° aperture angle. Doors can be hinged right or left (easy to change) |
| Side panels | Removable, horizontal divided, locks with universal key |
| Top Panel | One-piece design, removable.Two lateral cable entries cable entries 88 mm wide, covered by brushes over the entire depth of the enclosure and a ventilation opening, suitable for the installation of fans, covered with sheet steel blind panels. |
| Bottom panel | open |
| Mounting profile | 2 pairs of 19" vertical profiles, front / rear, stepless in depth adjustable from inside, with U label |
| Feet | Set of adjustable feet as standard |
| Earthing | pre-installed flat earthing kit |
| Protection class | IP00 |
| Bayable | yes |
| Maximum load [KG] | 2000 kg |