CU 8202 4P
Data cable, S/FTP, Category 8.2, AWG22, Euroclass Dca
2000 MHz
1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.6 mm
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH Orange RAL 2003
Product variants & stock
| Article No. | Stock | Product | Reaction to fire | Dimensions n x p x [mm (AWG)] | Outer sheath dimensions [mm] | CU rate [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|---|
| 19204400DK | CU 8202 4P | Dca-s2,d1,a1 | 4 x 2 x 0.62 (AWG22) | 8.2 | 36 | 69.2 | 0.21 | 1000 m drum | 40393910419849 |
Technical specifications
Electrically and mechanically excellent Cat.8.2 data cable with an extended frequency range up to 2000 MHz.
Exceeds the requirements of ISO/IEC 11801, IEC 61156-9, IEC 61156-5, EN 50173-1, and EN 50288-12-1.
Excellent shielding performance thanks to pair and braid shielding.
Clear distinction of conductors in the connector due to colored longitudinal stripes.
Compatible with all common connector systems according to EN 50173 and ISO/IEC 11801.
| Minimum bending radius (during installation) | 78 mm |
|---|---|
| Tensile strength (4P) | 110 N |
| Minimum number of impacts | 3 |
| Minimal crush resistance / 10cm | 1000 N |
| AWG | 22 |
| Solid / Flex | Solid wire |
| Minimum bending radius (permanently installed) | 39 mm |
| High-end data cable for data centres and structured building cabling. For the transmission of digital and analog voice, image, multimedia, and data signals. Suitable for all ICT network applications up to 40GBase-T (2000 MHz) up to 30 m (channel). Up to Class FA (1000 MHz) up to 100 m according to EN 50173-1 and ISO/IEC 11801, as well as for multimedia applications. Due to the increased conductor cross-section, it is ideal for Power over Ethernet (PoE), PoE+, and 4PPoE. |
| Category | Cat.8.2 |
|---|---|
| GBit/s | Up to 40 Gbit/s (max. length 30m) |
| Loop resistance at 20 °C | 119 Ω/km |
| Operating capacity | 43 pF/m |
| Impedance at 100 MHz, ±5Ω | 100 Ω |
| NVP % | 75 |
| Delay skew | 17 ns/100 m |
| Shielding | shielded |
| Near end unbalance attenuation LCL at 1-600 MHz | 40 dB |
| Transfer impedance 1/10/30 MHz | < 8/10/20 mΩ/m |
| Coupling attenuation | 85 dB |
| Segregation class | d |
| Installation temperature | 0 °C - +50 °C |
|---|---|
| Operating temperature | -20 °C - +60 °C |
| Wire colour | white/blue-white, white/orange-white, white/green-white, white/brown-white (with length stripes) |
| Imprint | DATWYLER «cable type» «additional text» «batch number» «meter marks» |
| Field of application | Indoor |
| Reaction to fire | EN 13501-6 |
|---|---|
| Euroclass | Dca |
| Smoke density | IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2 |
| Zero halogen no corrosive gases | IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2 |
| Flame propagation | IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2 |
| Flame spread | IEC 60332-3-24, EN 60332-3-24 |
| Cables standard | ISO/IEC 61156-9, EN 50288-12-1, ISO/IEC 61156-5 |
| Cat./Class | Cat.8.2 / Class I/II |
| PoE | IEEE 802.3bt Type 4 (100W) |
| Outer sheath material | FRNC/LSZH |
|---|---|
| Outer sheath colour | orange |