Contact us
CU_7702_4P
CU_duplex

CU 7702 4P / 2x4P F8

Data cable, S/FTP, Category 7A, AWG22, Euroclass Dca
1300 MHz

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.5 mm ∅
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH orange RAL 2003

01_RoHS 04_Propagation 05_Spread 09_Oil- 10_Schielded_EN 06_Density 08_System- 03_LS0H CPR_Dca CPR_Eca Piktogramm_4PPoE_PL93m

Product variants & stock

Article No. Stock ProductReaction to fireDimensions n x p x [mm (AWG)]Outer sheath dimensions [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Packing unitGTIN / EAN
17740000DK
CU 7702 4PDca-s2,d1,a14 x 2 x 0.62 (AWG22)7.634.9620.181000 m drum40393910043266
17740000DL
CU 7702 4PDca-s2,d1,a14 x 2 x 0.62 (AWG22)7.634.9620.18500 m drum40393910043259
17739000DL
CU 7702 2x4PDca-s2,d1,a12 x (4 x 2 x 0.62 (AWG22))7.6 x 16.269.81250.36500 m drum40393910043440

Technical specifications

Electrically and mechanically superior quality Cat. 7<sub>A</sub> data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and prEN 50288-9-1. Excellent shielding effect due to individually screened pairs and overall copper braid. Easy identification of wires thanks to longitudinal colour markings. Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Tensile strength (4P) 120 N
Tensile strength (2x4P) 240 N
Minimum bending radius (during installation) 64 mm
Minimal crush resistance / 10cm 1000 N
Minimum number of impacts 10
AWG 22
Solid / Flex Solid wire
Minimum bending radius (permanently installed) 32 mm
Data cable for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
Due to the increased wire section eminently suited for Power over Ethernet (PoE) / PoE+ and 4PPoE up to 100W.
Category Cat.7A
GBit/s Up to 10 Gbit/s
Loop resistance at 20 °C 116 Ω/km
Operating capacity 43 pF/m
Impedance at 100 MHz, ±5Ω 100 Ω
NVP % 76
Delay skew 15 ns/100 m
Shielding shielded
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Transfer impedance 1/10/30 MHz < 5/5/8 mΩ/m
Coupling attenuation 85 dB
Segregation class d
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Wire colour white/blue-white, white/orange-white, white/green-white, white/brown-white (with length stripes)
Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
Field of application Indoor
Reaction to fire EN 13501-6
Euroclass Dca
Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1
Flame spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2
Cables standard ISO/IEC 61156-5, EN 50288-9-1
Cat./Class Cat.7A / Class FA
PoE IEEE 802.3bt Type 4 (100W)
Outer sheath material FRNC/LSZH
Outer sheath colour orange

Documentation