Contact us
CU_7150_4P
CU_duplex

CU 7150 4P / 2x4P F8 Multimedia

Data cable, S/FTP, Category 7A, AWG22, Euroclass Dca
1500 MHz

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.6 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH

01_RoHS 04_Propagation 05_Spread 09_Oil- 10_Schielded_EN 06_Density 08_System- 03_LS0H CPR_Dca CPR_Eca Piktogramm_4PPoE_PL97m

Product variants & stock

Article No. Stock ProductReaction to fireDimensions n x p x [mm (AWG)]Outer sheath dimensions [mm]CU rate [kg/km]Weight [kg/km]Fire load [kWh/m]Packing unitGTIN / EAN
18292500DK
CU 7150 4PDca-s2,d1,a14 x 2 x 0.64 (AWG22)7.440.261.10.1401000 m drum40393910040401
18292500DL
CU 7150 4PDca-s2,d1,a14 x 2 x 0.64 (AWG22)7.440.261.10.140500 m drum40393910040395
18292600DL
CU 7150 2x4PDca-s2,d1,a12 x (4 x 2 x 0.64 (AWG22))1680.4134.30.36500 m drum40393910040333

Technical specifications

Electrically and mechanically superior quality Cat.7A data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Minimum bending radius (during installation) 64 mm
Tensile strength (2x4P) 260 N
Tensile strength (4P) 130 N
Minimum number of impacts 10
Minimal crush resistance / 10cm 1000 N
AWG 22
Solid / Flex Solid wire
Minimum bending radius (permanently installed) 32 mm
Data cable for structured premises cabling. For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Optimized for the transmission of broadband signals (such as cable TV) in accordance with ISO/IEC 11801-4.
Due to the increased wire section eminently suited for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W. Fully supports the application of HDBaseT (TM) Spec 1.0 and Spec 2.0
Category Cat.7A
GBit/s Up to 10 Gbit/s
Loop resistance at 20 °C 111 Ω/km
Operating capacity 41 pF/m
Impedance at 100 MHz, ±5Ω 100 Ω
NVP % 80
Delay skew 17 ns/100 m
Shielding shielded
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Transfer impedance 1/10/30 MHz < 5/5/8 mΩ/m
Coupling attenuation 85 dB
Segregation class d
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Wire colour white/blue-white, white/orange-white, white/green-white, white/brown-white (with length stripes)
Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»
Field of application Indoor
Reaction to fire EN 13501-6
Euroclass Dca
Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1
Flame spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2
Cables standard ISO/IEC 61156-5, EN 50288-9-1
Cat./Class Cat.7A / Class FA
PoE IEEE 802.3bt Type 4 (100W)
Outer sheath material FRNC/LSZH
Outer sheath colour orange

Documentation