FL – Low Fire Hazard – unsupported

Low rise - travelling height maximum 80m

Drawing according to article number 191113 - Type 8582-F

Product variants & stock

Only show available stock

Article No.	Product	Cable design	CU rate [kg/km]	Weight [kg/km]	GTIN / EAN
191110	8511-F	12 G 0.75 mm²	87	259	40393910069716
185125	8511-F	18 G 0.75 mm²	130	382	40393910077353
191112	8511-F	24 G 0.75 mm²	173	511	40393910069693
191111	8636-F	12 G 0.75 + 3 x 2 x 0.50 mm² (FTP)	123	420	40393910069709
182205	8827-F	3 G 2.50 + 14 x 1.00 + 4 x 2 x 0.34 mm² (FTP)	244	735	40393910077766
191113	8582-F	24 G 1.00 + 3 x 2 x 0.75 mm² (FTP) + 1 CX 75 Ω	306	958	40393910069686
190491	8582-F	2 x 1.50 + 8 x 2 x 0.50 mm² (FTP) + 1 CX 75 Ω	149	524	40393910070873

Description

Elevator suspension cable for indoor and panoramic elevators.

General properties

Core	black, white numbered, G = with green-yellow core(s)
Pair/quad	various colours or black with white numbers
Coax	black
Operating temperature	-15 °C - +70 °C

Mechanical properties

Maximum free suspension	45 m
Maximum travelling height	80 m
Maximum running speed	4 m/s
Acceleration	0.8 m/s²
Recommended loop diameter	according to table, tolerance -50/+100 mm

Application

To comply with the correct installation procedures please refer to the Datwyler installation manual which is available separately

Electrical properties

Rated voltage Uo/U	according to table

Construction

Standards

Standard for flexible lift control cables	EN 50214