FO-DCS 3U/7HP converter plug-in-modules, 2x MTP on 3x MTP
for FO-DCS modular subracks / panels
for OM3, OM4, OS2
High-Performance FO-DCS converter plug-in module MTP 24F, 3U/7HP
Product variants & stock
Download
| Article No. | Stock | Product | Colour | Front plate material | Material | Weight [kg] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|
| 571520 | FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OM3 | black | Polycarbonate (PC) | Polycarbonate (PC) | 0.25 kg | 1 pc. | 40393910044553 | |
| 571521 | FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OM4 | black | Polycarbonate (PC) | Polycarbonate (PC) | 0.25 kg | 1 pc. | 40393910044546 | |
| 571522 | FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OS2 (G.652.D) | black | Polycarbonate (PC) | Polycarbonate (PC) | 0.25 kg | 1 pc. | 40393910044539 |
Technical specifications
Polycarbonate (PC) housing with press-fit side panels (sealed) and polycarbonate (black).
At the rear these FO-DCS plug-in modules have two MTP couplers which are routed to the front couplers (3x MTP) by way of internal fanouts and integrated fibre management.
The front panel is fitted with 3 MTP adapters and provides two integrated labelling strips on both sides of the MTP ports for customer-specific printing.
Fixation with two knurled screws (captive).
At the rear these FO-DCS plug-in modules have two MTP couplers which are routed to the front couplers (3x MTP) by way of internal fanouts and integrated fibre management.
The front panel is fitted with 3 MTP adapters and provides two integrated labelling strips on both sides of the MTP ports for customer-specific printing.
Fixation with two knurled screws (captive).
| System | FO-DCS |
|---|---|
| Fully equipped | yes |
| Acceptance capacity | 24 fibres, 3 MTP ports (8 fibres) |
| Outer dimensions (HxWxD) | 3 U, 129 mm x 35 mm x 186 mm |
| These plug-in modules provide two 12-fibre MTP® adapters for incoming trunk cables on the rear side and three 8-fibre MTP ports on the front side. Therefore, the incoming fibres are used to full capacity. The converter plug-in modules find modular application in FO-DCS modular panels (19"/1U) or in FO-DCS subracks (19"/3U, 19"/4U). They allow, with the same number of fibres, a one-third higher port count than conventional MTP front panels. They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL). |
| Housing with front panel, equipped with 3 MTP adapters (type A). Rear fitted with 2 MTP adapters (Type A). Module fanout (High P) 24 fibres, 2x MTP Elite® (female) on 3x MTP Elite (male). Delivery inclusive of test reports on all fanouts. |
| We recommend Datwyler';s high-performance FO-DCS MTP-LCD fanout cables and FO-DCS MTP patch cables to connect the transcievers. |
| Adapter, front side | x , |
|---|