Electrically and mechanically superior quality Cat.7A data cable with extended frequency range up to 1300 MHz - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
AWG
22
Tensile strength (4P)
120
N
Tensile strength (2x4P)
240
N
Minimum bending radius during installation
64
mm
Minimum bending radius permanently installed
32
mm
Minimal crush resistance / 10cm
1000
N
Minimum number of impacts
10
Solid / Flex
Solid wire
Segregation class
d
Category
Cat.7A
Loop resistance at 20 °C
116
Ω/km
Operating capacity
43
pF/m
Delay skew
15
ns/100 m
Impedance at 100 MHz, ±5Ω
100
Ω
Transfer impedance 1/10/30 MHz
< 5/5/8 mΩ/m
Near end unbalance attenuation LCL at 1-600 MHz
40
dB
NVP %
76
Coupling attenuation
85
dB
GBit/s
Up to 25 Gbit/s (max. length 50 m)
Shielding
shielded
High-end data cable for data centres and for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to 25GBase-T (1250 MHz) up to 50 m (Channel) and up to class FA (1000 MHz) up to 100 m in accordance with EN 50173-1 and ISO/IEC 11801 as well as for multimedia applications in the CATV frequency range up to 862 MHz in accordance with IEC 15018.
Due to the increased wire section eminently suited for Power over Ethernet (PoE), PoE+ and 4PPoE.