Tornare a: Cavi in rame

CU 7725 4P / 2x4P F8

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.5 mm ∅;
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LS0H

Descrizione

Electrically and mechanically superior quality Cat.7A data cable with extended frequency range up to 1300 MHz – exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.

  • High-end data cable for data centres and for structured premises cabling.
    For the transmission of digital and analogue voice, video and data signals.
    Suitable for all ICT network applications up to 25GBase-T (1250 MHz) up to 50 m (Channel) and up to class FA (1000 MHz) up to 100 m in accordance with EN 50173-1 and ISO/IEC 11801 as well as for multimedia applications in the CATV frequency range up to 862 MHz in accordance with IEC 15018.
    Due to the increased wire section eminently suited for Power over Ethernet (PoE), PoE+ and 4PPoE.
  • Reaction to fire (Euroclasses) EN 13501-6: Cca
  • Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
  • Flame Propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
  • Flame Spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
  • Smoke Density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
  • Cat./Class Cat.7A / Class FA
  • PoE IEEE 802.3bt Type 4 (100W)
  • Category Cat.7A
  • Attenuazione di accoppiamento 85 dB
  • Ritardo Skew 15 ns/100 m
  • EMC shielded
  • GBit\s Up to 25 Gbit/s (max. length 50 m)
  • Impedenza a 100 MHz, ±5Ω 100 Ω
  • Loop resistance at 20°C 116 Ω/km
  • Near end unbalance attenuation LCL at 1-600 MHz 40 dB
  • NVP % 76
  • operating capacity 43 pF/m
  • Transfer impedance 1/10/30 MHz 5/5/8 mΩ/m
  • Installation temperature 0 °C - +50 °C
  • Operating temperature -20 °C - +60 °C
  • Campo di applicazione Interno
  • Impronta DATWYLER «cable type» «additional text» «batch number» «meter marks»
  • Colore del filo bianco - blu/blu, bianco arancio/arancione, bianco verde/verde, bianco marrone/marrone in accordo con IEC 60189 e IEC 60708 (contrassegnato da un anello)
  • AWG 22
  • Curvatura minima durante l'installazione 64 mm
  • Minimum bending radius permanently installed 32 mm
  • Resistenza minima allo schiacciamento / 10cm 1000 N
  • Minimum number of impacts 10
  • Solid / Flex stabile
  • Resistenza alla trazione (2x4P) 240 N
  • Resistenza alla trazione (4P) 120 N

Documentazione

ENDENLFRCNESIT
Scheda tecnica Scheda tecnica Scheda tecnica Scheda tecnica Scheda tecnica file-icon Scheda tecnica Scheda tecnica

Versioni

Article No.MagazzinoProdottoNumero di coppieAWGReaction To FireDimensions n x p x [mm (AWG)]Outer sheath colourNumero di coreDiametro mmOuter sheath materialDiametro esterno della guaina [mm]Dimensioni della guaina esterna [mm]Tasso di CU [kg/km]Weight [kg/km]Fire load [kWh/m]Number of cablesPacking unit
19434900CK CU 7725 4P4AWG22Cca-s1a,d1,a14 x 2 x 0.62 (AWG22)arancia20.62 mmFRNC/LSZH7.66211000 m tamburo
19434900CL CU 7725 4P4AWG22Cca-s1a,d1,a14 x 2 x 0.62 (AWG22)arancia20.62 mmFRNC/LSZH7.6621500 m tamburo
19435002CL CU 7725 2x4P4AWG22Cca-s1b,d1,a12 x (4 x 2 x 0.62 (AWG22))arancia20.62 mmFRNC/LSZH7.6 x 16.269.8 kg/km1250.36 kWh/m2500 m tamburo