KS-T8 Class I, tool-less

RJ45 module, shielded, Class I (ISO/IEC), Keystone

RJ45 module KS-T8 Class I, tool-less, shielded, with dust shutter


Varianti di prodotto e stock

Articolo n. Stock ProdottoColorePeso [kg]Unità di imballaggioGTIN / EAN
RJ45 module KS-T8 Class I, tool-less, shielded, with dust shutter (grey)argento0.03 kg12 pcs.40393910150414

Specifiche tecniche

Potential balancing possibility directly at the module when needed. Comes with removable grey dust shutter. For the transmission of digital and analogue voice-, video- and data signals. The KS-T8 Class I RJ45 module is specified up to 2000 MHz in compliance with the component standard IEC 60603-7-1. In conjunction with Category 8 data cables, it enables acceptance measurements for Class I permanent links with good reserves. The module is designed for high bit rate applications in data centres, making it suitable for the transmission of 25 Gigabit Ethernet in accordance with IEEE 802.3bq and 40 Gigabit Ethernet. Useable for Power over Ethenet Plus (PoE+) corresponding to IEEE 802.3at. Solid zinc die casting housing with mounting clip for installation in Keystone panels and outlets. Contact spring with phosphor bronze alloy, plated with gold. A wire manager in combination with the integrated movable housing wing enables tool-less IDC connections. Only for cutting the wires a plane wire cutter is necessary. The 360° metal shield ensures a durable fully shielded environment. Fully integrated strain relief. The module is re-usable.
Connection type Connettori a perforazione di isolante IDC
Solid copper wire 0.41 mm (AWG 26) - 0.64 mm (AWG 22)
Stranded copper wire AWG26/7 - AWG22/8
Diameter over Insulation 0.90 mm - 1.40 mm
Re-connection per AWG 22, AWG 23 e AWG 24 quando si usa lo stesso filo o un diametro maggiore
Re-usable una volta
GBit/s A 40 Gbit/s
Schermatura schermati
Installation temperature -10 °C - +60 °C
Storage temperature -40 °C - +70 °C
Operating temperature -20 °C - +60 °C
Cabling standards ISO/IEC 11801, EN 50173-1, TIA/EIA 568-x
Cat./Class Cat.8.1 / Class I
Connector standards IEC 60512-99-001, IEC 60603-7-1