(N)HXH FE180 E30-E60

Safety cable, 0.6/1kV, Keram
Halogen-free, with improved fire characteristics;
with reference to VDE 0266 and CENELEC HD 604 S1,
circuit integrity (FE180) in accordance with VDE 0472-814, IEC 60331,
System Circuit Integrity E30-E60* in accordance with DIN 4102-12

1 Conductor: solid/stranded
2 Fire barrier: high-peformance Keram compound
3 Insulation: cross-linked polymer, zero halogen
4 Filler: flame retardant, zero halogen
5 Sheath: FRNC/LSZH

07_Circuit 04_Propagation 05_Spread 06_Density 08_System 03_LS0H

Variantes de productos y existencias

Artículo No. Stock ProdottoDiámetro [mm2]Prop. CU [kg/km]Peso [kg/km]ConductorConstrucciónUnidad de embalajeGTIN / EAN
(N)HXH FE180 E30-E60 4x1,51.581281de corrido4L40393910064711
3 x 10100554LNPEpor metro40393910061925
3 x 16160809LNPEpor metro40393910061932
4 x 3535019293LPEpor metro40393910061949
4 x 7070035783LPEpor metro40393910061956
4 x 5050025983LPEpor metro40393910061963
4 x 9595047853LPEpor metro40393910061970
(OEM) 8670-U 4x2.5mm2 E30-E60 3LPE FE480 OEM) 8670-U 4x2.5mm2 E30-U 4x2.5mm2 E30 4 x 2.52.502903LPEpor metro40393910062045
5 x 2.52.5018033LNPEpor metro40393910062052
5 x 3535023853LNPEpor metro40393910062069
(OEM) 8670-U 7x2.5mm2 E30-E60 6LPE FE780 OEM) 8670-U 7x2.5mm2 E30-U 7x2.5mm2 E30 7 x 2.52.504196LPEpor metro40393910062083
1 x 24024002563Lpor metro40393910062090
(N)HXH FE180 E30-E60 1 x 15015001590Lpor metro40393910066296

Especificaciones técnicas

Safety cables are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. System Circuit Integrity is provided up to 400 V operating voltage. Permitted operating temperature at conductor of +90˚C.
Radio de flexión mínimo permanente (multinúcleo) 12 x D
Plegado mínimo durante la instalación (núcleo único) 15 x D
Radio de flexión mínimo permanente (núcleo único) 15 x D
Mínimo de flexión durante la instalación (multinúcleo) 12 x D
Observaciones radio de flexión 50% reduction if installation at 30°C and with a template
Integridad del aislamiento FE 180
Integridad de circuito E30-E60*
Temperatura de instalación -5 °C - +50 °C
Temperatura de funcionamiento -45 °C - +90 °C
Tensión de prueba a 50 Hz 3500
Tensión nominal 0.6/1kV
* System Circuit Integrity is dependent on installation method
Conductor Bare copper, solid or stranded, IEC 60228 and EN 60228 (≥16 mm2: VDE 0295)
Aislamiento Special compound, HD 604 S1 part 5 H(≥16 mm2: double-layer insulation, special compound, VDE 0266 "HXI1")
Colores principales CENELEC HD 308 S2(≥16 mm2: CENELEC HD 308 S2, VDE 0293)
Relleno HD 604 S1 part 5 H(≥16 mm2: halogen-free polyolefin compound)
Material exterior de la vaina Compound, HD 604 S1 part 5 H(16 mm2: polyolefin compound in accordance with VDE 0276-604, CENELEC HD 604 S1 "HM4", flame-retardant)
Integridad de circuito IEC 60331-11/-21 (180 minutes), VDE 0472-814 (FE180), BS 6387 C/W/Z, IEC 60331-1 (120 minutes), IEC 60331-2 (120 minutos), EN 50200 (PH120 minutes), NBN 713-020 (Rf1), VDE 0482-200 (PH120), AREI-RGIE Art.104-FR1
Integridad del Sistema de Circuito DIN 4102-12, AREI-RGIE Art.104-FR2
Densidad de humo EN 61034-1/-2, IEC 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD, SEV TP 20B/3C 3.4.3
Cero halógeno gases no corrosivos EN 60754-1/-2, IEC 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA, SEV TPV11
Propagación de llamas EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1, SEV TP 20B/3C
Dispersión de llamas EN 60332-3-24, IEC 60332-3-24, VDE 0482-332-3-24, AREI-RGIE Art.104-F2, SEV TP 20B/3C