Safety cable, 0.6/1kV, armoured with rodent protection, Keram
halogen-free, with improved fire characteristics,
with reference to SEV TP 20B/3C and CENELEC HD 604 S1 part 5.H
Safety cables are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled.
Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used.
Permitted operating temperature at conductor of +90˚C.
Radio de flexión mínimo permanente (multinúcleo)
12 x D
Plegado mínimo durante la instalación (núcleo único)
15 x D
Radio de flexión mínimo permanente (núcleo único)
15 x D
Mínimo de flexión durante la instalación (multinúcleo)
12 x D
Integridad del aislamiento
FE 180
Integridad de circuito
E30
Temperatura de instalación
-5 °C - +50 °C
Temperatura de funcionamiento
-45 °C - +90 °C
Tensión de prueba a 50 Hz
3500
Tensión nominal
0.6/1kV
* System Circuit Integrity is dependent on installation method
Conductor
Bare copper, solid or stranded, IEC 60228 and EN 60228 (≥16 mm2: VDE 0295)
Aislamiento
Special compound, HD 604 S1 part 5 H(≥16 mm2: double-layer insulation, special compound, VDE 0266 "HXI1")
Colores principales
CENELEC HD 308 S2
Relleno
HD 604 S1 part 5 H(≥16 mm2: halogen-free polyolefin compound)
Cubierta interior
Compound, HD 604 S1 part 5 H(≥16 mm2: Polyolefin compound, VDE 0276-604, CENELEC HD 604 S1 ""HM 4"", flame-retardant)
Blindaje (protección de roedores)
Cable unipolar con cinta de cobre (CLCU) y cable multipolar con cinta de acero galvanizado (CL)
Material exterior de la vaina
Compound, HD 604 S1 part 5 H(16 mm2: in accordance with CENELEC HD 308 S2 and VDE 0293)