KS-TS 1/8 tool-less slimline Cat.6/EA

RJ45 module, shielded, Category 6/EA

KS-TS 1/8 tool-less slimline Cat.6/EA RJ45 module

07_Modular 09_Oil-

Varianti di prodotto e stock

Articolo n. Stock ProdottoColorePeso [kg]Unità di imballaggioGTIN / EAN
RJ45 module KS-TS 1/8 tool-less slimline Cat.6/EA shieldedargento0.03 kg12 pcs.40393910087963
RJ45 module KS-TS 1/8 tool-less slimline Cat.6/EA shieldedargento0.03 kg10 pcs.40393910226768

Specifiche tecniche

For the transmission of digital and analogue voice-, video- and data signals. The KS-TS RJ45 module is designed to shorten the termination and installation times. It exceeds the IEC 60603-7-5 standard's requirements for Cat. 6 connecting hardware up to 250 MHz. It also fulfils all Class EA Channel requirements up to 500 MHz when combined with Cat. 7 or Cat. 7A data cables. Therefore it is applicable for 10-gigabit Ethernet transmissions in accordance with IEEE 802.3. Useable for Power over Ethenet Plus (PoE+) corresponding to IEEE 802.3at. Solid zinc die casting housing with mounting clip for installation in Keystone panels and outlets. Compact construction for high packing density in faceplantes/outlets (up to 3 modules). Contact spring with phosphor bronze alloy, plated with gold. For connecting the wires a wire manager is used in combination with two integrated moveable housing wings for tool-less IDC connections. Only for cutting the wires a plane wire cutter is necessary. Strain relief via cable tie. The module is re-usable.
Connection type Connettori a perforazione di isolante IDC
Solid copper wire 0.50 mm (AWG 24) - 0.65 mm (AWG 22)
Stranded copper wire AWG26/7 - AWG26/7
Diameter over Insulation 0.70 mm - 1.40 mm
Re-connection per AWG 22, AWG 23 e AWG 24 quando si usa lo stesso filo o un diametro maggiore
Re-usable una volta
GBit/s A 10 Gbit/s
Schermatura schermati
Installation temperature -10 °C - +60 °C
Storage temperature -40 °C - +70 °C
Operating temperature -20 °C - +60 °C
Cabling standards ISO/IEC 11801, EN 50173-1, TIA/EIA 568-x
Cat./Class Cat.6 / Class EA
Connector standards IEC 60512-99-001, IEC 60603-7-5
PoE IEEE 802.3bt Type 4 (100W)