Contattateci
modul_ks_ta_01
panel_ks_24x_s_02

KS-TA 1/8 Cat.6/EA, 45 degree angled

RJ45 module, shielded, Category 6/EA
for Patch panel KS 24x-s

KS-TA 1/8 Cat.6/EA RJ45 module,
shielded, 45 degree angled

07_Modular

Varianti di prodotto e stock

Articolo n. Stock ProdottoColorePeso [kg]Unità di imballaggioGTIN / EAN
418068
RJ45 module KS-TA 1/8 Cat.6/EA shielded, 45 degree angledargento0.04 kg10 pcs.40393910226799

Specifiche tecniche

The module is re-usable.
For the transmission of digital and analogue voice-, video- and data signals.
The KS-TA RJ45 module exceeds the IEC 60603-7-5 standard's requirements for Cat. 6 connecting hardware up to 250 MHz.
It also fulfils all Class EA Permanent-Link (PL) requirements up to 500 MHz when combined with Category 7 or 7A data cables. Therefore it is applicable for 10-Gigabit Ethernet transmissions in accordance with IEEE 802.3.
Useable for Power over Ethenet Plus (PoE+) corresponding to IEEE 802.3at.
The module KS-TA is suitable for the patch panel KS24x-s (Article No. 418023) only.
Due to the module's 45 degree angled front patch connections can be made diagonally from left and right. Solid zinc die casting housing with mounting clip for installation in Keystone panel KS 24x-s.
Contact spring with phosphor bronze alloy, plated with gold.
For connecting the wires a wire manager is used in combination with two integrated moveable housing wings for tool-less IDC connections.
Only for cutting the wires a plane wire cutter is necessary.
Strain relief via cable tie.
Connection type Connettori a perforazione di isolante IDC
Solid copper wire 0.50 mm (AWG 24) - 0.65 mm (AWG 22)
Stranded copper wire AWG26/7 - AWG26/8
Diameter over Insulation 0.70 mm - 1.40 mm
Re-connection per AWG 22, AWG 23 e AWG 24 quando si usa lo stesso filo o un diametro maggiore
Re-usable una volta
GBit/s A 10 Gbit/s
Schermatura schermati
Installation temperature -10 °C - +60 °C
Storage temperature -40 °C - +70 °C
Operating temperature -20 °C - +60 °C
Cabling standards ISO/IEC 11801, EN 50173-1, TIA/EIA 568-x
Cat./Class Cat.6 / Class EA
Connector standards IEC 60603-7-5
PoE IEEE 802.3bt Type 4 (100W)

Documentazione