CU 7002 4P GG-PE

Data cable, S/FTP, Category 7, AWG23, Euroclass Fca
1000 MHz

1 Inner conductor: AWG23 Bare copper wire
2 PE insulated conductor: 1.4 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Sheath: FRNC/LS0H orange RAL 2003
6 Rodent protection: with glass rovings
7 Ripcord
8 Outer sheath: PE black

01_RoHS 04_Propagation- 05_Spread- 02_PoEp_rt 10_Schielded_EN 06_Density 08_System- 03_LS0H CPR_Fca

Varianti di prodotto e stock

Articolo n. Stock ProdottoReaction to fireDimensions n x p x [mm (AWG)]Dimensioni della guaina esterna [mm]Tasso di CU [kg/km]Weight [kg/km]Fire load [kWh/m]Unità di imballaggioGTIN / EAN
19192300FZ
CU 7002 4PFca4 x 2 x 0.57 (AWG23)11.431.1129.50.648al metro40393910029420

Specifiche tecniche

Applicable for outdoor installation due to rodent protection and PE outer cable sheath with higher UV resistance.
Robust cable design with a high mechanical stability.
Electrically and mechanically superior quality Cat.7 data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-4-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Curvatura minima (durante l'installazione) 92 mm
Resistenza alla trazione (4P) 150 N
Minimum number of impacts 20
Resistenza minima allo schiacciamento / 10cm 2000 N
AWG 23
Solid / Flex stabile
Raggio di curvatura minimo (installato in modo permanente) 46 mm
Data cable for structured premises and outdoor cabling.
With rodent protection and increased UV protection (due to PE outer sheath).
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Applicable for Power over Ethernet (PoE) / PoE+ / 4PPoE up to 100W.
The cables are designed for occasional contact with water, but are not suitable for permanent installation or total immersion in water. The cable jacket is designed to resist water, but should be avoided coming into direct contact with water for a long time.
To prevent water from entering, the cable jacket must remain intact. It is necessary to prevent water from entering the ends of the cable. This also requires a suitable connection system.
When laying directly underground, care must be taken to ensure that no point mechanical loads occur, as the mechanical structure is unsuitable for laying in a gravel bed, for example.
Laying in protective shells made of concrete (cable duct blocks) or steel or in plastic pipes is recommended. Where the cable comes into direct contact with the ground, embedding in a sand bed is recommended.
Categoria Cat.7
GBit/s A 10 Gbit/s
Loop resistance at 20 °C 140 Ω/km
Operating capacity 42 pF/m
Impedenza a 100 MHz, ±5Ω 100 Ω
NVP % 81
Ritardo Skew 12 ns/100 m
Schermatura schermati
Near end unbalance attenuation LCL at 1-600 MHz 40 dB
Attenuazione di accoppiamento 85 dB
Segregation class d
Installation temperature 0 °C - +50 °C
Operating temperature -20 °C - +60 °C
Colore del filo bianco/blu, bianco/arancio, bianco/verde, bianco/marrone, in conformità alle norme IEC 60189 e IEC 60708
Impronta DATWYLER «cable type» «additional text» «batch number» «meter marks»
Campo di applicazione All'aperto
Reaction to fire EN 13501-6
Euroclass Fca
Densità del fumo IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero alogeni nessun gas corrosivo IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Standard dei cavi ISO/IEC 61156-5, EN 50288-4-1
Cat./Class Cat.7 / Class F
PoE IEEE 802.3bt Type 4 (100W)
Materiale della guaina esterna FRNC/LSZH-GG-PE
Colore della guaina esterna nero

Documentazione