Contattateci

HD-DCS MTP module, 1x MTP on 6x LCD/PC, OM3

for HD-DCS modular panels

Varianti di prodotto e stock

Articolo n. Stock ProdottoColoreMaterialePeso [kg]Unità di imballaggioGTIN / EAN
473524
HD-DCS MTP module, 1x MTP on 6x LCD/PC, OM3neroPolycarbonate (PC)0.18 kg1 pc.40393910225471

Specifiche tecniche

Polycarbonate (PC) housing with press-fit cover (sealed). At the rear these HD-DCS modules have one MTP coupler which is routed to the front couplers (6LCD) by way of an internal fanout. Front couplers with integrated, automatic transparent dust shutters.
System HD-DCS
Fully equipped sì
Acceptance capacity 12 fibres
Fibre colour code IEC 60304
Adattatore, lato anteriore 1 x 6LCD, turchese
Adapter material, front side Polimerico
Dust protection, front side sì
Laser protection, front side no
Dust/Laser protection, front side Otturatore interno, traslucido
Materiale manicotto, lato anteriore Zirconia (ZrO2)
Connettori, lato anteriore 12 x LC/PC 0°
Ferrule material, front side Zirconia (ZrO2)
Adattatore, lato posteriore 1 x MTP, turchese, Type A (key up/key down)
Adapter material, rear side Polythermide
Tipo di adattatore, lato posteriore Type A (key up/key down)
Dust protection, rear side sì
Laser protection, rear side sì
Dust/Laser protection, rear side Tappo antipolvere
Connettori, lato posteriore 1 x MTP12 female Elite PC 0°
Ferrule material, rear side Polyphenylene sulfide resin
Housing, equipped with 1x 6LCD adapter with automatic transparent dust protection caps and ceramic sleeves on the front.
Rear fitted with 1 MTP adapter (Type A).
1 module fanout (HighP): with 12 fibres, 1x MTP Elite® (female) on 12x LC (ceramic ferrules).
HD-DCS MTP® modules are suitable for all high-density and high-performance applications with duplex signals, particularly in the data centre environment.
They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front.
They are used to accept pre-assembled MTP trunk cables.
Packing densities of up to 144 fibres on 1U are achieved with these modules.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS LCD Uniboot patch cables with push-pull rods.
Insertion loss (IL), maximal, front side 0.25 dB
Insertion loss (IL), typical, front side 0.15 dB
Return loss (RL), minimal, front side 35 dB
Return loss (RL), typical, front side 40 dB
Insertion loss (IL), maximal, rear side 0.25 dB
Insertion loss (IL), typical, rear side 0.15 dB
Return loss (RL), minimal, back side 35 dB
Return loss (RL), typical, back side 45 dB
Tipologia di fibra G50/125 OM3
Standard LC (IEC) IEC 61754-20
Standard MTP (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32

Documentazione