FO-DCS 3U/7HP MTP plug-in modules, 2x MTP on 6x LCQ OM3

for FO-DCS modular subracks / panels

High-performance FO-DCS MTP plug-in modules, 24F, 3U/7HP

Varianti di prodotto e stock

Articolo n. Stock ProdottoColoreMaterialeMateriale della piastra anteriorePeso [kg]Unità di imballaggioGTIN / EAN
57150000ZY
FO-DCS 3U/7HP plug-in module, 2x MTP on 6x LCQ, OM3neroPolycarbonate (PC)Polycarbonate (PC)0.3 kg1 pc.40393910006438

Specifiche tecniche

Polycarbonate (PC) housing with press-fit side panels (sealed) and polycarbonate (black) or aluminium front panel (1U/7HP). At the rear these FO-DCS plug-in modules have two MTP couplers which are routed to the front couplers (6x LC Quad) by way of internal fanouts and integrated fibre management. The black PC front panels provide labelling strips on both sides of the LCD ports for customer-specific printing. Fixed with two knurled screws (captive).
System FO-DCS
Fully equipped
Acceptance capacity 6 porte quadruple (24 fibre)
Dimensioni esterne 3 U, 129 mm x 35 mm x 180 mm
Fibre colour code IEC 60304
Adattatore, lato anteriore 6 x LCQ, turchese
Adapter material, front side Polimerico
Dust protection, front side
Laser protection, front side no
Dust/Laser protection, front side Tappo antipolvere
Materiale manicotto, lato anteriore Zirconia (ZrO2)
Connettori, lato anteriore 24 x LC/PC 0°
Ferrule material, front side Zirconia (ZrO2)
Adattatore, lato posteriore 2 x MTP, nero, Type A (key up/key down)
Adapter material, rear side Polythermide
Tipo di adattatore, lato posteriore Type A (key up/key down)
Dust protection, rear side
Laser protection, rear side no
Dust/Laser protection, rear side Tappo antipolvere
Connettori, lato posteriore 2 x MTP12 female Elite PC 0°
Ferrule material, rear side Polyphenylene sulfide resin
Housing with front panel, equipped with 6 LC Quad adapters (ceramic sleeves).
Rear fitted with 2 MTP adapters (Type A).
2 module fanouts (High P): per 12 fibres, 1x MTP Elite® (female) on 12x LC (ceramic ferrules).
Delivery inclusive of test reports on fanout.
FO-DCS MTP® plug-in modules are suitable for all high-performance applications with duplex signals, particularly in the data centre environment.
They find modular application in FO-DCS modular panels (19"/1U) or in FO-DCS subracks (19"/3U, 19"/4U).
They are used to accept pre-assembled MTP trunk cables.
Packing densities of up to 144 fibres on 3U are achieved with these plug-in modules.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
Insertion loss (IL), maximal, front side 0.25 dB
Insertion loss (IL), typical, front side 0.1 dB
Return loss (RL), minimal, front side 35 dB
Return loss (RL), typical, front side 40 dB
Insertion loss (IL), maximal, rear side 0.3 dB
Insertion loss (IL), typical, rear side 0.15 dB
Return loss (RL), minimal, back side 30 dB
Return loss (RL), typical, back side 35 dB
Tipologia di fibra G50/125 OM3

Documentazione