Contattateci

FO-DCS 3U/7HP converter plug-in-modules, 2x MTP on 3x MTP

for FO-DCS modular subracks / panels
for OM3, OM4, OS2

High-Performance FO-DCS converter plug-in module MTP 24F, 3U/7HP

Varianti di prodotto e stock

Articolo n. Stock ProdottoColoreMaterialeMateriale della piastra anteriorePeso [kg]Unità di imballaggioGTIN / EAN
571520
FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OM3neroPolycarbonate (PC)Polycarbonate (PC)0.25 kg1 pc.40393910044553
571521
FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OM4neroPolycarbonate (PC)Polycarbonate (PC)0.25 kg1 pc.40393910044546
571522
FO-DCS converter plug-in-module 3U/7HP, 2x MTP – 3x MTP, OS2 (G.652.D)neroPolycarbonate (PC)Polycarbonate (PC)0.25 kg1 pc.40393910044539

Specifiche tecniche

Polycarbonate (PC) housing with press-fit side panels (sealed) and polycarbonate (black). At the rear these FO-DCS plug-in modules have two MTP couplers which are routed to the front couplers (3x MTP) by way of internal fanouts and integrated fibre management. The front panel is fitted with 3 MTP adapters and provides two integrated labelling strips on both sides of the MTP ports for customer-specific printing. Fixation with two knurled screws (captive).
System FO-DCS
Fully equipped sì
Acceptance capacity 24 fibres, 3 MTP ports (8 fibres)
Dimensioni esterne 3 U, 129 mm x 35 mm x 186 mm
These plug-in modules provide two 12-fibre MTP® adapters for incoming trunk cables on the rear side and three 8-fibre MTP ports on the front side. Therefore, the incoming fibres are used to full capacity.
The converter plug-in modules find modular application in FO-DCS modular panels (19"/1U) or in FO-DCS subracks (19"/3U, 19"/4U).
They allow, with the same number of fibres, a one-third higher port count than conventional MTP front panels.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
Housing with front panel, equipped with 3 MTP adapters (type A).
Rear fitted with 2 MTP adapters (Type A).
Module fanout (High P) 24 fibres, 2x MTP Elite® (female) on 3x MTP Elite (male).
Delivery inclusive of test reports on all fanouts.
We recommend Datwyler';s high-performance FO-DCS MTP-LCD fanout cables and FO-DCS MTP patch cables to connect the transcievers.
Adattatore, lato anteriore x ,

Documentazione