HD-DCS BO module, 12x MPO, OM4

for HD-DCS modular panels

Varianti di prodotto e stock

Articolo n. Stock ProdottoDimensioni esterneColoreMaterialePeso [kg]Unità di imballaggioGTIN / EAN
473570
HD-DCS BO module, 12x MPO, OM439 mm x 100 mm x 120 mmneroPolycarbonate (PC)0.17 kg1 pc.40393910145229

Specifiche tecniche

Polycarbonate (PC) housing with press-fit cover. At the rear the HD-DCS BO modules have two slots fitted with cable grommets. Front couplers with translucent dust plugs.
System HD-DCS
Acceptance capacity 144 fibres (MTP12)
HD-DCS BO modules are suitable for all high-density and high-performance applications with parallel optic signals, particularly in the data centre environment.
They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front and the back.
They are used to accept pre-assembled MTP trunk cables.
A packing density of 576 fibres (MTP12) on 1U are achieved with these type of modules.
Housing, equipped with 2x 6MPO adapter with translucent dust plug protection on front side.
Rear side is fitted with a cable grommet.
As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS MTP patch cables with push-pull rods.
Tipo di adattatore, lato anteriore Type A (key up/key down)
Adattatore, lato anteriore 2 x 6MPO, heather violet, Type A (key up/key down)
Adapter material, front side Polimerico
Dust protection, front side
Laser protection, front side no
Dust/Laser protection, front side Tappo antipolvere
Standard MTP (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32

Documentazione