Contattateci
Abzweigdose_180x182x90mm_web
Abzweigdose_254x355x111mm_web

FO-DCS loose tube distribution boxes

for FO-DCS splice plug-in modules

FO-DCS loose tube distribution box,
type 1

Varianti di prodotto e stock

Articolo n. Stock ProdottoDimensioni esterneColorePeso [kg]Unità di imballaggioGTIN / EAN
470634
FO-DCS Loose tube distribution box type 1, 180 x 182 x 90 mm62 mm x 65 mm x 130 mmgrigio chiaro0.32 kg1 pc.40393910148398
470635
FO-DCS Loose tube distribution box type 2, 254 x 355 x 111 mm111 mm x 254 mm x 355 mmgrigio chiaro2 kg1 pc.40393910148381
470637
Corrugated plastic tube M12grigioal metro40393910148374
309602
Screwed cable gland M20 with locknutgrigio0.05 kg1 pc.40393910189865
309608
PMA adapter M12 with thread for corrugated plastic tube M12nero0.05 kg1 pc.40393910189858
309495
Screwed cable gland M25 x 1.5 with locknutgrigio0.05 kg1 pc.40393910189896
309609
PMA adapter M16 with thread for corrugated plastic tube M12nero0.05 kg1 pc.

Specifiche tecniche

Plastic boxes available in two sizes (type 1 and type 2).
Loose tube fibre optic cables enter via screwed cable glands (M20 / M25).
Single loose tubes are routed to the plug-in splice modules in corrugated plastic tubes (M12).
The FO-DCS loose tube distribution boxes for FO-DCS splice plug-in modules (3U/7HP) are suitable for the partition of multi-fibre loose tube cables or for the neat and safe storage of the excess tube lengths (approx. 2.0 m) when fibre optic cables with loose tube designs are used which must be spliced in-situ.
These boxes allow for easy and safe splice works on a table in front of the rack.
They are mounted in the back area of the racks in most cases.
Plastiv box with transparent cover (IP54).
Equipped with internal mounting plate and two bending limitation elements (r = 50 mm).
Through holes and dummy plug screws in the side panels. (type 1:12x M12, 2x M20, 1x M25, type 2: 18x M16, 2x M25, 1x M32)

Documentazione