Safety cable, 0.6/1kV armoured with rodent protection, Keram
halogen-free, with improved fire characteristics,
with reference to VDE 0266 and CENELEC HD 604 S1,
circuit integrity (FE180) in accordance with VDE 0472-814, IEC 60331,
System Circuit Integrity E30-E60* in accordance with DIN 4102-12
1 Conductor: solid/stranded
2 Fire barrier: high-peformance Keram compound
3 Insulation: cross-linked polymer, zero halogen
4 Filler: flame retardant, zero halogen
5 Inner sheath: Polyolefin, flame retardant, low smoke, zero halogen
6 Armouring: galvanised steel tape
7 Sheath: FRNC/LSZH
Varianti di prodotto e stock
Articolo n.
Stock
Prodotto
Colore della guaina esterna
Diametro mm²
Diametro esterno della guaina [mm]
Tasso di CU [kg/km]
Weight [kg/km]
Fire load [kWh/m]
Conductor
Construction
GTIN / EAN
196453
(N)HXH-J CL FE180 E30-E60 3 x 4
nero
18
115
507
1.22
solid
LNPE
40393910060775
192724
(N)HXH-J CL FE180 E30-E60 5 x 2.5
nero
2.5
19
120
545
1.38
solid
3LNPE
40393910066647
Specifiche tecniche
Cables with intrinsic fire resistance are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of Circuit Integrity E30-E60* in accordance with DIN 4102-12. Circuit Integrity is guaranteed at an operating voltage up to 400V.
Permitted operating temperature at conductor of +90˚C.
Minimum bending radius permanent (multi core)
12 x D
Curvatura minima durante l'installazione (anima singola)
15 x D
Minimum bending radius permanent (single core)
15 x D
Curvatura minima durante l'installazione (multicore)
12 x D
Integrità dell'isolamento
FE 180
Integrità del circuito
E30-E60*
Installation temperature
-5 °C - +50 °C
Operating temperature
-45 °C - +90 °C
Tensione di prova a 50Hz
4000
Nominal voltage
0.6/1kV
System Circuit Integrity is dependent on installation method.
Conduttore
Bare copper, solid or stranded, IEC 60228 and EN 60228 (VDE 0295)
Isolamento
Double insulation, cross-linked, high-performance Keram special compound, VDE 0266 "HXI1"