Contattateci

(N)HXM(St)H

Shielded power cable, 300/500V
halogen-free, with improved fire characteristics,
VDE 0250-214

1 Conductor: solid/stranded
2 Insulation: cross-linked PE, zero halogen
3 Drain wire: tinned copper
4 Filler: flame retardant, zero halogen
5 Shielding: Al-laminated tape
6 Sheath: FRNC/LSZH

07_Circuit- 04_Propagation 05_Spread 06_Density 08_System- 03_LS0H

Varianti di prodotto e stock

Articolo n. Stock ProdottoDiametro mm²Diametro esterno della guaina [mm]Tasso di CU [kg/km]Weight [kg/km]Fire load [kWh/m]ConductorConstructionGTIN / EAN
1301193
(N)HXM(St)H-J 3 x 1.5/1.51.5/1.59431500.36solidLNPE40393910106428
1301194
(N)HXM(St)H-J 3 x 2.52.510721500.42solidLNPE40393910106411
1301212
(N)HXM(St)H-J 4 x 1.5/1.51.5/1.510581760.41solid2LNPE40393910106381
1301213
(N)HXM(St)H-J 4 x 2.5/2.52.5/2.511962450.48solid2LNPE40393910106374
1301214
(N)HXM(St)H-J 5 x 1.51.511722220.48solid3LNPE40393910106367
1301195
(N)HXM(St)H-J 5 x 2.52.5121201500.56solid3LNPE40393910106404

Specifiche tecniche

For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete, except for direct embedding in cast, rammed or vibrated concrete. Also suitable for outdoor applications. Permitted operating temperature at conductor of +70˚C.
Minimum bending radius permanent (multi core) 4 x D
Curvatura minima durante l'installazione (multicore) 6 x D
Integrità dell'isolamento No
Integrità del circuito No
Installation temperature 5 °C - +50 °C
Operating temperature -40 °C - +90 °C
Impronta On request
Additional dimensions available on request.
Conduttore Bare copper, solid or stranded, IEC 60228 and EN 60228 (VDE 0295)
Isolamento Cross-linked Polyethylene, CENELEC HD 604 S1 and VDE 0276-604 "2XI1"
Colori delle anime CENELEC HD 308 S2, VDE 0293
Riempitrice Halogen-free compound
Shielding Al-laminated tape with tinned copper drain wire
Materiale della guaina esterna Polyolefin compound, VDE 0250-214 "HM2"
Densità del fumo IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
Zero alogeni nessun gas corrosivo IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
Propagazione della fiamma AREI-RGIE Art.104-F1, EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2
Flame spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2

Documentazione