NHXMH

Power cable, 300/500V
halogen-free, with improved fire characteristics,
VDE 250-214

Varianti disponibili e stock
Specifiche tecniche
Documentazione

1 Conductor: solid/stranded
2 Insulation: cross-linked PE zero halogen
3 Filler: flame retardant zero halogen
4 Sheath: FRNC/LSZH

Varianti di prodotto e stock

Mostra solo lo stock disponibile

Articolo n.	Prodotto	Numero di core	Diametro mm²	Diametro esterno della guaina [mm]	Tasso di CU [kg/km]	Weight [kg/km]	Fire load [kWh/m]	Conductor	Construction	GTIN / EAN
154675	NHXMH-O 2 x 1.5	2	1.5	8.5	29	100	0.33	solid	LN	40393910207736
154676	NHXMH-O 2 x 2.5	2	2.5	9	48	115	0.33	solid	LN	40393910207729
149254	NHXMH-J 3 x 1.5	3	1.5	9.2	43	110	0.33	solid	LNPE	40393910207958
154369	NHXMH-J 3 x 2.5	3	2.5	10	72	145	0.38	solid	LNPE	40393910207811
154677	NHXMH-J 3 x 4	3	4	12	115	230	0.59	solid	LNPE	40393910207712
154678	NHXMH-J 3 x 6	3	6	13	173	300	0.68	solid	LNPE	40393910207705
173842	NHXMH-J 3 x 10	3	10	16	288	510	1.08	solid	LNPE	40393910207507
154367	NHXMH-J 4 x 1.5	4	1.5	9	58	130	0.38	solid	2LNPE	40393910207835
154679	NHXMH-J 4 x 2.5	4	2.5	10.5	96	200	0.46	solid	2LNPE	40393910207699
154680	NHXMH-J 4 x 4	4	4	12.5	154	290	0.70	solid	2LNPE	40393910207682
154681	NHXMH-J 4 x 6	4	6	14	230	390	0.83	solid	2LNPE	40393910207675
174718	NHXMH-J 4 x 10	4	10	17	384	620	1.25	solid	2LNPE	40393910207491
154368	NHXMH-J 5 x 1.5	5	1.5	10	72	150	0.44	solid	3LNPE	40393910207828
154370	NHXMH-J 5 x 2.5	5	2.5	11	120	205	0.50	solid	3LNPE	40393910207804
154371	NHXMH-J 5 x 4	5	4	13.5	192	340	0.81	solid	3LNPE	40393910207798
154372	NHXMH-J 5 x 6	5	6	15	288	455	0.93	solid	3LNPE	40393910207781
169929	NHXMH-J 5 x 10	5	10	18.5	480	730	1.44	solid	3LNPE	40393910207521
169930	NHXMH-J 5 x 16	5	16	22.5	768	1150	2.06	stranded	3LNPE	40393910207514
154682	NHXMH-J 7 x 1.5	7	1.5	10.5	101	195	0.55	solid	5LPE	40393910207668
154683	NHXMH-J 7 x 2.5	7	2.5	12.5	168	285	0.74	solid	5LPE	40393910207651
174719	NHXMH-J 10 x 1.5	10	1.5	14.5	144	330	0.92	solid	9LPE	40393910207484
156849	NHXMH-J 12 x 1.5	12	1.5	15	173	345	0.95	solid	11LPE	40393910207644
174720	NHXMH-J 24 x 1.5	24	1.5	19.5	346	610	1.65	solid	23LPE	40393910207477

Specifiche tecniche

Descrizione

For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete, except for direct embedding in cast, rammed or vibrated concrete.
Also suitable for outdoor applications.

Proprietà generali

Integrità dell'isolamento	No
Integrità del circuito	No
Installation temperature	5 °C - +50 °C
Operating temperature	-40 °C - +70 °C
Impronta	On request

Proprietà meccaniche

Curvatura minima durante l'installazione (multicore)	6 x D
Minimum bending radius permanent (multi core)	4 x D

Nota

Additional dimensions available on request.

Costruzione

Conduttore	Bare copper, solid or stranded, IEC 60228 and EN 60228 (VDE 0295)
Isolamento	Cross-linked Polyethylene, CENELEC HD 604 S1 and VDE 0276-604 "2XI1"
Colori delle anime	CENELEC HD 308 S2, VDE 0293
Riempitrice	Halogen-free compound
Materiale della guaina esterna	Polyolefin compound, VDE 0250-214 "HM2"

Norme

Densità del fumo	IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD
Zero alogeni nessun gas corrosivo	IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA
Propagazione della fiamma	AREI-RGIE Section 4.3.3 F1, EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2
Flame spread	IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2

NHXMH

Varianti di prodotto e stock

Specifiche tecniche

Documentazione