Contattateci
Server_Rack_Standard_DSRS_01
Server_Rack_Standard_DSRS_lichtgrau
DSRS_3
Di più

Server Racks Standard DSRS

19″/42U
with perforated front and rear doors

Server Rack Standard DSRS, 42U, 800 x 1000 mm

Varianti di prodotto e stock

Articolo n. Stock ProdottoAltezza [U]Altezza [mm]Larghezza [mm]Profondità [mm]ColorePeso [kg]Unità di imballaggioGTIN / EAN
195305
Server Rack Standard DSRS, 42 U, 1.987 x 800 x 1.000 mm4219878001000nero133 kg1 pc.40393910200485
195306
Server Rack Standard DSRS, 42 U, 1.987 x 800 x 1.200 mm4219878001200nero158 kg1 pc.40393910200478

Specifiche tecniche

The Datwyler Server Racks Standard DSRS are designed to provide good-quality cabinets that offer an unrivaled cost-performance ratio.
Carico massimo [KG] 1000 kg
Pannello inferiore Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm)
Pannello superiore Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm). Ventilation: Via a covered 420 x 440 mm hole.
Telaio di base Welded sheet steel frame (1.5 mm)
Porta anteriore One-piece perforated doors, 86% perforation, with swivel handle lock, 1-point locking, DIN single-profile cylinder, universal key, up to 180° aperture angle; front door can be hinged right or left (easy to change)
Porta posteriore One-piece perforated doors, 86% perforation, with swivel handle lock, 1-point locking, DIN single-profile cylinder, universal key, up to 180° aperture angle.
Pannelli laterali Removable, locks with universal key
Piedi Set of adjustable feet as standard
Classe di protezione IP 30
Accoppiabile yes
Profilo di montaggio 2 pairs of 19" vertical profiles (front / rear), stepless depth adjustment from inside, with U label; rack offers 3 vertical 19"/2U positions per 19" extrusion
Messa a terra pre-installed flat earthing kit
Comes with 28 mounting kits (screws, cage nuts, washers).
- plinth, 100 mm (4 corners, 4 panels and mounting kit)
- cable entry, double brush strip panel with 300 x 100 opening
- potential equalization bar 8 x 8 mm, 22 connection points, 40A, with mounting kit and earthing cable
- cable mangement / cable tray, 1800 mm height
More dimensions available on request

Documentazione