Contattateci

Network Racks Standard DNRS

19″/42U
with glass front door

Network Rack Standard DNRS, 42U, 600 x 800 mm

Varianti di prodotto e stock

Articolo n. Stock ProdottoAltezza [U]Altezza [mm]Larghezza [mm]Profondità [mm]ColorePeso [kg]GTIN / EAN
195302
Network Rack Standard DNRS, 42 U, 2.000 x 600 x 600 mm422000600600grigio chiaro83 kg40393910200515
195303
Network Rack Standard DNRS, 42 U, 2.000 x 600 x 800 mm422000600800grigio chiaro94 kg40393910200508
195300
Network Rack Standard DNRS, 42 U, 2.000 x 800 x 800 mm422000800800grigio chiaro113 kg40393910200539
195304
Network Rack Standard DNRS, 42 U, 2.000 x 600 x 1.000 mm4220006001000grigio chiaro114 kg40393910200492
195301
Network Rack Standard DNRS, 42 U, 2.000 x 800 x 1.000 mm4220008001000grigio chiaro133 kg40393910200522

Specifiche tecniche

The Datwyler Network Racks Standard DNRS are designed to provide good-quality cabinets that offer an unrivaled cost-performance ratio.
Carico massimo [KG] 500 kg
Pannello inferiore Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm)
Pannello superiore Integrated standard steel panels with several covered 300 x 100 mm holes and 500 x 115 mm holes (one 300 x 115 mm + two 100 x 115 mm). Ventilation: Via a covered 480 x 280 mm hole.
Telaio di base Welded sheet steel frame (1.25 mm)
Porta anteriore With tinted safety glass and swivel handle lock, 1-point locking, DIN single-profile cylinder, up to 180° aperture angle, can be hinged right or left (easy to change)
Porta posteriore Sheet steel, removable, with removable blind plate for cable entry (300 x 100 mm), lock, universal key
Pannelli laterali Removable, locks with universal key
Piedi Set of adjustable feet as standard
Classe di protezione IP 30
Accoppiabile yes
Profilo di montaggio 2 pairs of 19" vertical profiles, front / rear, adjustable from inside, with U label
Messa a terra pre-installed flat earthing kit
Comes with 28 mounting kits (screws, cage nuts, washers).
- plinth, 100 mm (4 corners, 4 panels and mounting kit)
- cable entry, double brush strip panel with 300 x 100 opening
- potential equalization bar 8 x 8 mm, 22 connection points, 40A, with mounting kit and earthing cable
- cable mangement / cable tray, 1800 mm height

Documentazione