The RJ45 plug fulfils the product requirements of IEC 60603-7-51 and also the requirements of ISO/IEC 11801 for category 5 to 100 MHz
It enables acceptance measurements for class D permanent links
This makes it suitable for the transmission of 1 Gigabit Ethernet in accordance with IEEE 802.3ab.
Suitable for PoE applications in accordance with IEEE 802.3at.
Sturdy die-cast zinc housing for industrial applications
Gold-plated contact surface
Cable connection using IDC contacts and tool-free wire contacting
A flat side cutter is only required to cut the wires to length
Cable entry with 360° braided shield contact. Strain relief via plug terminal.
The RJ45 plug can be reconnected
Plugging cycles
750
Type of connector
RJ45
Housing main material
Zinc diecast
Contact surface
Gold over nickel
Connection type
IDC
Solid copper wire
0.41 mm (AWG 26) - 0.64 mm (AWG 22)
Stranded copper wire
0.14 mm² (AWG 26/7) - 0.35 mm² (AWG 22/7)
Re-connection
≥ 10 cycles (for the same or larger cross-section)
