HD-DCS BO module, 24x MPO, OS2
for HD-DCS modular panels
Product variants & stock
Technical specifications
Polycarbonate (PC) housing with press-fit cover.
At the rear the HD-DCS BO modules have a slot fitted with a cable grommet.
Front couplers with translucent dust plugs.
At the rear the HD-DCS BO modules have a slot fitted with a cable grommet.
Front couplers with translucent dust plugs.
| System | HD-DCS |
|---|---|
| Acceptance capacity | 288 fibres (MTP12) |
| HD-DCS BO modules are suitable for all high-density and high-performance applications with parallel optic signals, particularly in the data centre environment. They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front and the back. They are used to accept pre-assembled MTP trunk cables. A packing density of 1152 fibres (MTP12) on 1U are achieved with these type of modules. |
| Housing, equipped with 4x 6MPO adapter with translucent dust plug protection on front side. Rear side is fitted with a cable grommet. |
| As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS MTP patch cables with push-pull rods. |
| Adapter type, front side | Type A (key up/key down) |
|---|---|
| Adapter, front side | 4 x 6MPO, green, Type A (key up/key down) |
| Adapter material, front side | Polymeric |
| Dust protection, front side | yes |
| Laser protection, front side | no |
| Dust/Laser protection, front side | Dust plug |
| MTP standard (IEC) | IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32 |
|---|