FO-DCS modular panels, 19”/1U
to take 3 FO-DCS plug-in modules / front plates 3U/7HP
Modularly equippable FO-DCS 19"/1U panel
Product variants & stock
Download
| Article No. | Stock | Product | Colour | Material | Weight [kg] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|
| 470643 | FO-DCS modular panel, 19”/1U (delivery without plug-in modules/front panels) | black | Aluminium | 2.78 kg | 1 pc. | 40393910148350 |
Technical specifications
Sturdy aluminium housing with base, side panels and front 19"/1U mounting brackets.
Pre-assembled to take a maximum of three 3U/7HP FO-DCS plug-in modules or front plates.
3 cable support rails for the back side cable entries are enclosed separately.
Pre-assembled to take a maximum of three 3U/7HP FO-DCS plug-in modules or front plates.
3 cable support rails for the back side cable entries are enclosed separately.
| System | FO-DCS |
|---|---|
| Acceptance capacity | 3 FO-DCS inserts |
| Outer dimensions (HxWxD) | 1 U, 44.4 mm x 482.6 mm x 315 mm |
| The modularly equippable 19"/1U panel can be used for a wide variety of applications, depending on the type of plug-in module. It can be used as a modular high-density solution for up to 36 duplex ports (72 fibres) or up to 36 MTP ports (432 fibres) in the data centre environment. It will accept up to 3 FO-DCS 3U/7HP plug-in modules or up to 3 FO-DCS 3U/7HP front plates that are used to terminate pre-assembled LCD or MTP® trunk or breakout cables or fibre optic cables which are spliced in-situ. Easy migration to all parallel optic applications, e.g. to 40/100 GbE, is possible with FO-DCS 3U/7HP MTP front plates. |
| 19"/1U panel with 19" mounting brackets (without plug-in modules / front plates) 3 cable support rails, enclosed separately 19" mounting material Can be combined with various blanking panels and management panels from the Datwyler range. |
| MTP® is a registered brand of US Conec. |