Tornare a: Moduli, plug e adattatori

PS-TERA 4P

PS-TERA 4P module, Cat.7A

Descrizione

The PS-TERA module is a shielded module that accepts 1-pair, 2-pair and 4-pair plugs.
It fulfils all requirements for Cat. 7A products up to 1000 MHz in accordance with IEC 61076-3-104.
Therefore the module is suitable for 10-gigabit Ethernet transmissions in accordance with IEEE 802.3an and for upcoming applications that need even higher bandwidths.
The module is intended for screened Cat.7 or 7A data cable termination.
As it accepts 1-, 2- or 4-pair plugs, it enables the transmission of multiple applications over one data cable at the same time (Plug Sharing).
The plugged-in plugs are interlocked. Datwyler offers coloured cable boots for the differentiation of applications.
Unused modules are protected with hinged dust shutters.
The module is compatible with the wire diameters AWG 22 to AWG 23. The PS-TERA modules can be fitted in all Datwyler faceplates, patch panels or floor box solutions with MPS openings

  • Connector standards IEC 61076-3-104
  • Cabling standards ISO/IEC 11801, EN 50173-1
  • Cat./Class Cat.7A / Class FA
  • TERATM is a registered tradename of Siemon.
  • Schermatura schermati
  • GBit\s A 10 Gbit/s
  • Solid copper wire -

Documentazione

ENDENLFRCNESIT
ASS_PIM_manual ASS_PIM_manual file-icon file-icon file-icon file-icon file-icon file-icon
ASS_PIM_tenderText file-icon ASS_PIM_tenderText file-icon file-icon file-icon file-icon file-icon
Scheda tecnica Scheda tecnica Scheda tecnica Scheda tecnica Scheda tecnica file-icon Scheda tecnica Scheda tecnica

Versioni

Article No.MagazzinoProdottoColorePeso [kg]Unità di imballaggioGTIN
1409591 Plug PS-TERA 4P solid AWG 22-230.01 kg40393910211085
1408502 Module PS-TERA 4P Cat.7A/FA (IEC) 1000 MHznero0.03 kg1 pc.40393910211078