Tornare a: Cavi in rame 









CU 7150 4P / 2x4P F8 Multimedia
1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.6 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH











Descrizione
Electrically and mechanically superior quality Cat.7A data cable – exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
- Data cable for structured premises cabling. For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Optimized for the transmission of broadband signals (such as cable TV) in accordance with ISO/IEC 11801-4.
Due to the increased wire section eminently suited for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W. Fully supports the application of HDBaseT (TM) Spec 1.0 and Spec 2.0
- Reaction to fire (Euroclasses) EN 13501-6: Dca
- Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
- Flame Propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
- Flame Spread IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
- Smoke Density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
- Cat./Class Cat.7A / Class FA
- PoE IEEE 802.3bt Type 4 (100W)
- Category Cat.7A
- Attenuazione di accoppiamento 85 dB
- Ritardo Skew 17 ns/100 m
- Schermatura shielded
- GBit\s Up to 10 Gbit/s
- Impedenza a 100 MHz, ±5Ω 100 Ω
- Loop resistance at 20°C 111 Ω/km
- Near end unbalance attenuation LCL at 1-600 MHz 40 dB
- NVP % 80
- operating capacity 41 pF/m
- Transfer impedance 1/10/30 MHz
5/5/8 mΩ/m
- Installation temperature 0 °C - +50 °C
- Operating temperature -20 °C - +60 °C
- Campo di applicazione Interno
- Impronta DATWYLER «cable type» «additional text» «batch number» «meter marks»
- Colore del filo bianco - blu/blu, bianco arancio/arancione, bianco verde/verde, bianco marrone/marrone in accordo con IEC 60189 e IEC 60708 (contrassegnato da un anello)
- AWG 22
- Curvatura minima durante l'installazione 64 mm
- Minimum bending radius permanently installed 32 mm
- Resistenza minima allo schiacciamento / 10cm 1000 N
- Minimum number of impacts 10
- Solid / Flex stabile
- Resistenza alla trazione (2x4P) 260 N
- Resistenza alla trazione (4P) 130 N
Documentazione
Versioni
Article No. | Magazzino | Prodotto | Numero di coppie | AWG | Fire load (MJ/m) | Reaction To Fire | Dimensions n x p x [mm (AWG)] | Outer sheath colour | Numero di core | Diametro mm | Outer sheath material | Diametro esterno della guaina [mm] | Tasso di CU [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Number of cables | Packing unit |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
18292500DK | CU 7150 4P | 4 | AWG22 | 0.62 MJ/m | Dca-s2,d1,a1 | 4 x 2 x 0.64 (AWG22) | arancia | 2 | 0.64 mm | FRNC/LSZH | 7.8 | 40.2 kg/km | 65 | 0.18 kWh/m | 1 | 1000 m tamburo | |
18292500DL | CU 7150 4P | 4 | AWG22 | 0.62 MJ/m | Dca-s2,d1,a1 | 4 x 2 x 0.64 (AWG22) | arancia | 2 | 0.64 mm | FRNC/LSZH | 7.8 | 40.2 kg/km | 65 | 0.18 kWh/m | 1 | 500 m tamburo | |
18292600DL | CU 7150 2x4P | 4 | AWG22 | 1.24 MJ/m | Dca-s2,d1,a1 | 2 x (4 x 2 x 0.64 (AWG22)) | arancia | 2 | 0.64 mm | FRNC/LSZH | 16 | 80.4 kg/km | 131 | 0.36 kWh/m | 2 | 500 m tamburo |