Contact us

HD-DCS Patch cable MTP - MTP, E9/125 G.652.D BLO

for HD-DCS

Technical specifications

Thin, very flexible fibre-optic patch cable (round cable, Ø 2.0 mm) with 12 fibres.
Each patch cable is equipped with push-pull tabs.
Low fire load due to its halogen-free flame-retardant LS0H sheath.
Available with up to 5 m standard lengths (other lengths on request).
Sticker labelling at both cable ends.
Standard polarisation modes can be type A, B or type C.
Labelled using stickers at both cable ends
Supplied with test report
MTP®-on-MTP patch cables are suitable for all high-performance applications with parallel optic signals in a data centre environment.
The round patch cables are pre-assembled with high-performance MTP connectors (female) at both ends.
They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
Cable Round
Outer sheath material FR/LSZH
Outer sheath colour yellow
Housing colour connector A yellow
Housing colour connector B yellow
Fibre type E9/125 G.652.D BLO
Connector type side A MTP12 female
Ferrule polishing connector A Elite APC 8°
IL maximal, connector A 0.3 dB
IL typical, connector A 0.1 dB
RL minimal, connector A 65 dB
RL typical, connector A 70 dB
Standard connector A IEC 61754-7, IEC 61755-3-31, IEC 611755-3-32
Connector type side B MTP12 female
Ferrule polishing connector B Elite APC 8°
IL maximal, connector B 0.3 dB
IL typical, connector B 0.1 dB
RL minimal, connector B 65 dB
RL typical, connector B 70 dB
Standard connector B IEC 61754-7, IEC 61755-3-31, IEC 611755-3-32

Documentation