CU 7725 4P / 2x4P F8
Data cable, S/FTP, 25GBase-T, AWG22, Euroclass Dca
1300 MHz
1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.5 mm ∅
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LS0H
Product variants & stock
| Article No. | Stock | Product | Reaction to fire | Dimensions n x p x [mm (AWG)] | Outer sheath dimensions [mm] | CU rate [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|---|
| 19434900DK | CU 7725 4P | Dca-s2,d1,a1 | 4 x 2 x 0.62 (AWG22) | 7.6 | 34.9 | 62 | 0.18 | 1000 m drum | 40393910022872 | |
| 19435000DL | CU 7725 2x4P | Dca-s2,d1,a1 | 2 x (4 x 2 x 0.62 (AWG22)) | 7.6 x 16.2 | 69.8 | 125 | 0.36 | 500 m drum | 40393910022841 |
Technical specifications
Electrically and mechanically superior quality Cat.7A data cable with extended frequency range up to 1300 MHz - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
| Tensile strength (4P) | 120 N |
|---|---|
| Tensile strength (2x4P) | 240 N |
| Minimum bending radius (during installation) | 64 mm |
| Minimal crush resistance / 10cm | 1000 N |
| Minimum number of impacts | 10 |
| AWG | 22 |
| Solid / Flex | Solid wire |
| Minimum bending radius (permanently installed) | 32 mm |
| High-end data cable for data centres and for structured premises cabling. For the transmission of digital and analogue voice, video and data signals. Suitable for all ICT network applications up to 25GBase-T (1250 MHz) up to 50 m (Channel) and up to class FA (1000 MHz) up to 100 m in accordance with EN 50173-1 and ISO/IEC 11801 as well as for multimedia applications in the CATV frequency range up to 862 MHz in accordance with IEC 15018. Due to the increased wire section eminently suited for Power over Ethernet (PoE), PoE+ and 4PPoE. |
| Category | Cat.7A |
|---|---|
| GBit/s | Up to 25 Gbit/s (max. length 50 m) |
| Loop resistance at 20 °C | 116 Ω/km |
| Operating capacity | 43 pF/m |
| Impedance at 100 MHz, ±5Ω | 100 Ω |
| NVP % | 76 |
| Delay skew | 15 ns/100 m |
| Shielding | shielded |
| Near end unbalance attenuation LCL at 1-600 MHz | 40 dB |
| Transfer impedance 1/10/30 MHz | < 5/5/8 mΩ/m |
| Coupling attenuation | 85 dB |
| Segregation class | d |
| Installation temperature | 0 °C - +50 °C |
|---|---|
| Operating temperature | -20 °C - +60 °C |
| Wire colour | white/blue-white, white/orange-white, white/green-white, white/brown-white (with length stripes) |
| Imprint | DATWYLER «cable type» «additional text» «batch number» «meter marks» |
| Field of application | Indoor |
| Reaction to fire | EN 13501-6 |
|---|---|
| Euroclass | Dca |
| Smoke density | IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD |
| Zero halogen no corrosive gases | IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA |
| Flame propagation | IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1 |
| Flame spread | IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2 |
| Cables standard | ISO/IEC 61156-5, EN 50288-9-1 |
| Cat./Class | Cat.7A / Class FA |
| PoE | IEEE 802.3bt Type 4 (100W) |
| Outer sheath material | FRNC/LSZH |
|---|---|
| Outer sheath colour | orange |