CU 7702 4P flex SHF1
Flexible data cable, S/FTP, Category 7, AWG26, Euroclass Dca
862 MHz
1 Inner conductor: AWG26, bare copper wire, stranded
2 PE insulated conductor: Ø 0.99 mm
3 Screen (pair): Alu PETP foil
4 Overall screen: tinned braided copper
5 Outer sheath: FRNC/LS0H SHF1
Product variants & stock
| Article No. | Stock | Product | Reaction to fire | Dimensions n x p x [mm (AWG)] | Outer sheath dimensions [mm] | CU rate [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|---|
| 19439301DK | CU 7702 4P FLEX SHF1 | Dca-s1a,d2,a1 | 4 x 2 x 0.132 (AWG26) | 6.4 | 18.1 | 45 | 0.138 | 1000 m drum | 40393910022254 |
Technical specifications
Electrically and mechanically superior quality Cat.7 patch cord - exceeds the requirements of ISO/IEC 11801, IEC 61156-6, EN 50173-1 and EN 50288-4-2.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy wire identification and termination due to different coloured wires.
Compatible with all current connecting hardware in accordance with EN 50173, ISO/IEC 11801 and IEC 60603-7.
Oil resistant, fire retardant and halogen free sheath.
Certified by Det Norske Veritas.
| Repeated bending | 1000 cycles |
|---|---|
| Tensile strength (4P) | 56 N |
| Minimal crush resistance / 10cm | 600 N |
| Minimum number of impacts | 10 |
| AWG | 26 |
| Solid / Flex | Stranded wire (flexible) |
| Minimum bending radius | 25.6 mm |
| As patch cord in patch panels and as equipment connection cable, especially suitable for CP (Consolidation Point) applications. Designed for use in industrial areas, particularly for higher requirements in offshore and marine applications. For the transmission of digital and analogue voice, video and data signals. Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801. Optimized for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018. Applicable for Power over Ethernet (PoE) / PoE+. |
| Versiones FRNC / LS0H disponibles |
| Category | Cat.7 |
|---|---|
| GBit/s | Up to 10 Gbit/s |
| Loop resistance at 20 °C | 270 Ω/km |
| Operating capacity | 43 pF/m |
| Impedance at 100 MHz, ±5Ω | 100 Ω |
| NVP % | 78 |
| Delay skew | 4 ns/100 m |
| Shielding | shielded |
| Near end unbalance attenuation LCL at 1-600 MHz | 40 dB |
| Transfer impedance | 10 mΩ/m |
| Coupling attenuation | 70 dB |
| Segregation class | c |
| Installation temperature | 0 °C - +50 °C |
|---|---|
| Operating temperature | -20 °C - +60 °C |
| Wire colour | white/blue, red/orange, black/green, yellow/brown, according to IEC 60189 and IEC 60708 |
| Imprint | DATWYLER CU 7702 4P FLEX AWG26 S/FTP CAT 7 IEC SHF1 NVP78% - DNVGL-CP-0403 - IEC 61156-6 <CPRClass> MADE IN SWITZERLAND <Lot-number> <length marking> M |
| Field of application | Off-Shore and Shipbuilding |
| Reaction to fire | EN 13501-6 |
|---|---|
| Euroclass | Dca |
| Smoke density | IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD |
| Zero halogen no corrosive gases | IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA |
| Flame propagation | IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1 |
| Cables standard | ISO/IEC 61156-6, EN 50288-4-2 |
| Cat./Class | Cat.7 / Class F |
| DNV standard | DNVGL-CP-0403 |
| PoE | IEEE 802.3af |
| Outer sheath material | FRNC/LSZH SHF1 |
|---|---|
| Outer sheath colour | grey |