JE-H(St)HRH...Bd FE180 E30-E90 fire alarm, black, B2ca
Fire alarm cable with steel wire braiding, max. 225V, Keram
halogen-free, with improved fire characteristics,
with reference to VDE 0815,
circuit integrity (FE180) in accordance with VDE 0472-814, IEC 60331, EN 50200,
System Circuit Integrity E30-E90* in accordance with DIN 4102-12
Fire behaviour according to EN 50575, EN 13601-6
1 Conductor: solid
2 Insulation: cross-linked polymer, halogen-free
3 Drain wire: copper, Ø 0.8 mm
4 Inner covering: plastic tape, halogen-free
5 Shielding: Al-laminated plastic foil, halogen-free
6 Inner sheath: FRNC/LS0H
7 Armouring: galvanised steel wire band
8 Sheath: FRNC/LS0H
Product variants & stock
Download
| Article No. | Stock | Product | Reaction to fire | Number of cores | Outer sheath diameter [mm] | CU rate [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|---|
| 19244300BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 1x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 8.8 | 15 | 99.8 | 0.256 | by the metre | 40393910230178 | |
| 19107100BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 2x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 9.3 | 25 | 125.2 | 0.295 | by the metre | 40393910230536 | |
| 19155400BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 4x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 12.2 | 45 | 190.4 | 0.437 | by the metre | 40393910230543 | |
| 19407000BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 8x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 18.4 | 85 | 419.9 | 0.964 | by the metre | 40393910230222 | |
| 19635400BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 12x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 19.3 | 126 | 491.9 | 1.070 | by the metre | 40393910230253 | |
| 19107000BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 16x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 21.1 | 166 | 557.4 | 1.141 | by the metre | 40393910230529 | |
| 19626500BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 20x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 23.3 | 206 | 680.9 | 1.412 | by the metre | 40393910230239 | |
| 19634700BZ | JE-H(St)HRH...Bd FE180 E30-E90 fire alarm 32x2x0.8 mm | B2ca-s1a,d1,a1 | 2 | 26.9 | 326 | 919.8 | 1.806 | by the metre | 40393910230246 |
Technical specifications
Cables with intrinsic fire resistance are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled. Suitable for indoor and outdoor applications. The steel wire braiding serves as mechanical protection. The fire alarm cables correspond to the demands of System Circuit Integrity E30-E90* in accordance with DIN 4102-12. System Circuit Integrity is guaranteed at an operating voltage up to 110V.
Permitted operating temperature at conductor of +70°C.
Suitable according to VKF fire protection guideline in escape routes and in tunnels according to Astra guideline 13022.
Permitted operating temperature at conductor of +70°C.
Suitable according to VKF fire protection guideline in escape routes and in tunnels according to Astra guideline 13022.
| operating capacity, 1km @ 800Hz | 120 |
|---|---|
| Test voltage 50Hz, core/core | 500 |
| peak voltage | 225 |
| Capacitive coupling 0,8 mm, 100m @ 800Hz | 200 |
| Maximum loop resistance 0,8 mm | 73.2 |
| Minimum insulation resistance | 100 |
| Test voltage 50Hz, core/screen | 2000 |
| Circuit integrity | FE 180 |
|---|---|
| System circuit integrity | E90 |
| Installation temperature | -5 °C - +50 °C |
| Operating temperature | -30 °C - +70 °C |
| Minimum bending during installation (multi core) | 7.5 x D |
|---|---|
| Minimum bending radius permanent (multi core) | 7.5 x D |
| Minimal crush resistance / 10cm | 1000 N |
| System Circuit Integrity dependent on installation method. |
| Conductor | Bare copper, solid, 0.8 mm diameter, VDE 0815 |
|---|---|
| Insulation | Fire-resistant, cross-linked, high-performance Keram special compound, EN 50290-2-36 |
| Core colours | VDE 0815 |
| Shielding | Al-laminated tape with copper drain wire Ø 0.8 mm |
| Inner sheath | Flame retardant polyolefin compound, VDE 0819-107, EN 50290-2-27 and VDE 0250-214 "HM2" |
| Armouring (rodent protection) | Galvanised steel wire braid |
| Outer sheath material | Flame retardant polyolefin compound VDE 0819-107, EN 50290-2-27 and VDE 0250-214 "HM 2" |
| Outer sheath colour | black |
| Circuit integrity | IEC 60331-11/-21 (180 minutes), VDE 0472-814 (FE180), IEC 60331-1 (120 minutes), IEC 60331-2 (120 minutes), EN 50200 (PH120 minutes), VDE 0482-200 (PH120), AREI-RGIE Section 4.3.3 FR1 |
|---|---|
| System circuit integrity | DIN 4102-12, AREI-RGIE Section 4.3.3 FR2 |
| Reaction to fire | EN 13501-6 |
| Euroclass | B2ca |
| Smoke density | IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD |
| Zero halogen no corrosive gases | IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA |
| Flame propagation | IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1 |
| Flame spread | IEC 60332-3-22/-24, EN 60332-3-22/-24, VDE 0482-332-3-22/-24, AREI-RGIE Section 4.3.3 F2 |