J-H(St)H...Bd fire alarm
Fire alarm cable, max. 300V
halogen-free, with improved fire characteristics,
VDE 0815
1 Conductor: solid
2 Insulatio: halogen-free polymer compound
3 Separator: plastic tape
4 Drain wire: tinned copper
5 Shielding: Al-laminated plastic foil
6 Sheath: FRNC/LSZH
Product variants & stock
Download
| Article No. | Stock | Product | Outer sheath colour | Number of cores | Outer sheath diameter [mm] | CU rate [kg/km] | Weight [kg/km] | Fire load [kWh/m] | Packing unit | GTIN / EAN |
|---|---|---|---|---|---|---|---|---|---|---|
| 157892 | J-H(St)H...Bd fire alarm 2x2x0.8 mm | red | 2 | 6.5 | 25 | 59 | 0.16 | by the metre | 40393910207637 | |
| 157893 | J-H(St)H...Bd fire alarm 4x2x0.8 mm | red | 2 | 8.5 | 45 | 111 | 0.29 | by the metre | 40393910207620 | |
| 157894 | J-H(St)H...Bd fire alarm 6x2x0.8 mm | red | 2 | 10.5 | 65 | 132 | 0.35 | by the metre | 40393910207613 | |
| 157895 | J-H(St)H...Bd fire alarm 10x2x0.8 mm | red | 2 | 13 | 106 | 216 | 0.55 | by the metre | 40393910207606 | |
| 1172017 | J-H(St)H...Bd fire alarm 20x2x0.8 mm | red | 2 | 15.5 | 206 | 508 | 1.21 | by the metre | 40393910107104 | |
| 1172018 | J-H(St)H...Bd fire alarm 30x2x0.8 mm | red | 2 | 16.3 | 307 | 599 | 1.36 | by the metre | 40393910107098 | |
| 1172019 | J-H(St)H...Bd fire alarm 40x2x0.8 mm | red | 2 | 16.5 | 407 | 787 | 1.67 | by the metre | 40393910107081 | |
| 1172021 | J-H(St)H...Bd fire alarm 80x2x0.8 mm | red | 2 | 31.5 | 809 | 1476 | 3.18 | by the metre | 40393910107074 | |
| 1172022 | J-H(St)H...Bd fire alarm 100x2x0.8 mm | red | 2 | 38 | 1010 | 1805 | 4.07 | by the metre | 40393910107067 |
Technical specifications
Installation cable with electrostatic shield for areas vulnerable to fire and with high concentration of people and property value. For ICT systems for lossless data and signal transmission. Suitable for laying in dry and humid rooms, on-wall and in-wall, also for outdoor use.
No underground laying. Not to be used for high-voltage transmission.
Permitted operating temperature at conductor of +70°C.
No underground laying. Not to be used for high-voltage transmission.
Permitted operating temperature at conductor of +70°C.
| operating capacity, 1km @ 800Hz | 120 |
|---|---|
| Maximum loop resistance 0,6 mm | 130 |
| Maximum loop resistance 0,8 mm | 73.2 |
| Test voltage 50Hz, core/screen | 800 |
| Minimum insulation resistance | 100 |
| Capacitive coupling 0,8 mm, 100m @ 800Hz | 200 |
| Capacitive coupling 0,6 mm, 100m @ 800Hz | 300 |
| Test voltage 50Hz, core/core | 800 |
| peak voltage | 300 |
| Minimum bending radius permanent (multi core) | 2.5 x D |
|---|---|
| Minimum bending during installation (multi core) | 7.5 x D |
| Circuit integrity | No |
|---|---|
| System circuit integrity | No |
| Installation temperature | -5 °C - +50 °C |
| Operating temperature | -30 °C - +70 °C |
| Additional dimensions available on request. |
| Conductor | Bare copper, solid, 0.6 or 0.8 mm diameter |
|---|---|
| Insulation | Halogen-free polymer compound, EN 50290-2-26 |
| Core colours | VDE 0815 |
| Shielding | Al-laminated plastic foil with drain wire, copper tinned |
| Outer sheath material | Halogen-free polymer compound, EN 50290-2-27 |
| Stranding | Cores twisted to star-quads and quads to units |
| Smoke density | IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Section 4.3.3 SD |
|---|---|
| Zero halogen no corrosive gases | IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Section 4.3.3 SA |
| Flame propagation | IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Section 4.3.3 F1 |
| Flame spread | IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Section 4.3.3 F2 |