Back to: Fixing devices

Insulation bridging set

for insulated ceilings, thickness 100 mm

Example for bridging set:
1 Mounting screw
2 Joint
3 Threaded rod
4 Nuts


Bridging set for mounting Datwyler clamps on insulated ceilings – insulation thickness: higher than 100 mm. Borehole depth = x+y.
Embedment depth in concrete (x): minimum of 70 mm,
plus thickness of non-flammable insulation (y).

  • Threaded rods delivered 0,5 m or 1 m in length - must be cut to the requested length (y = thickness of insulation). A thread cutting device which causes no flying sparks and provides a stop for equal lengths is available from specialised retailers.
    Maybe the plasterboarder can help you, too. You can use a 6 mm drill and mounting tools from specialised retailers.
    Bridging Set is also suitable for 400 mm. Threaded rod must be cut accordingly.
    A dril for borehole depths 400 mm is necessary!


Datasheet Datasheet Datasheet Datasheet Datasheet file-icon Datasheet Datasheet


Article No.StockProductWeight [kg]Packing unit
4000738 Ü-Set 400 mm11.6 kg100 sets