Back to: Safety cables

(N)HXCH FE180 E30-E60

Safety cable, 0.6/1kV, Keram
halogen-free, with improved fire characteristics,
with reference to VDE 0266 and CENELEC HD 604 S1,
circuit integrity (FE180) in accordance with VDE 0472-814, IEC 60331,
System Circuit Integrity E30-E60* in accordance with DIN 4102-12

1 Conductor: solid/stranded
2 Fire barrier: high-peformance Keram compound
3 Insulation: cross-linked polymer, zero halogen
4 Filler: flame retardant, zero halogen
5 Concentric conductor: bare copper wire
6 Reinforcing helix: bare copper tape
7 Separator: plastic tape
8 Sheath: FRNC/LSZH

Description

Cables with intrinsic fire resistance are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of System Circuit Integrity E30-E60* in accordance with DIN 4102-12. System Circuit Integrity is guaranteed at an operating voltage up to 400V.
Permitted operating temperature at conductor of +90˚C.

  • Outer sheath colour orange
  • Outer sheath material Flame retardant Polyolefin compound, CENELEC HD 604 S1 and VDE 0276-604 "HM4"
  • Concentric conductor Bare copper wires with reinforced helix
  • Conductor Bare copper, solid or stranded, IEC 60228 and EN 60228 (VDE 0295)
  • Core colours CENELEC HD 308 S2, VDE 0293
  • Filler Flame retardant, halogen-free thermoplastic compound
  • Insulation Double insulation, cross-linked, high-performance Keram special compound, VDE 0266 "HXI1"
  • Test voltage at 50Hz 4000 V
  • Installation temperature -5 °C - +50 °C
  • Operating temperature -45 °C - +90 °C
  • Minimum bending during installation (multi core) 12 x D
  • Minimum bending during installation (single core) 15 x D
  • Minimum bending radius permanent (multi core) 12 x D
  • Minimum bending radius permanent (single core) 15 x D
  • Screened No
  • System Circuit Integrity is dependent on installation method.
  • Zero halogen no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
  • Flame Propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
  • Flame Spread IEC 60332-3-22/-24 Cat. A/C, EN 60332-3-22/-24 Cat. A/C, VDE 0482-332-3-22/-24 Cat. A/C, AREI-RGIE Art.104-F2
  • Smoke Density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
  • System circuit integrity DIN 4102-12, AREI-RGIE Art.104-FR2
  • Circuit Integrity (FE180) IEC 60331-11/-21 (180 minutes),VDE 0472-814 (FE180),BS 6387 C/W/Z,IEC 60331-1 (120 minutes),IEC 60331-2 (120 minutes),EN 50200 (PH120 minutes),VDE 0482-200 (PH120),VDE 0482-362,AREI-RGIE Art.104-FR1

Documentation

ENDENLFRCNESIT
Datasheet Datasheet Datasheet Datasheet Datasheet file-icon Datasheet Datasheet
MPA Certificate file-icon MPA Certificate file-icon file-icon file-icon file-icon file-icon
VDE Certificate VDE Certificate file-icon file-icon file-icon file-icon file-icon file-icon

Versions

Article No.StockProductNumber of CoresDiameter mm²Outer sheath diameter [mm]CU rate [kg\km]Weight [kg\km]Fire load [kWh\m]ConductorConstruction
186943 (N)HXCH FE180 E30-E60 2 x 1.5/1.521.5/1.512.752 kg/km2240.60 kWh/msolidLN
186944 (N)HXCH FE180 E30-E60 2 x 2.5/2.522.5/2.513.580 kg/km2720.66 kWh/msolidLN
187232 (N)HXCH FE180 E30-E60 2 x 4/424/414.9123 kg/km3530.78 kWh/msolidLN
187234 (N)HXCH FE180 E30-E60 2 x 6/626/616182 kg/km4340.86 kWh/msolidLN
186945 (N)HXCH FE180 E30-E60 3 x 1.5/1.531.5/1.513.266 kg/km2490.65 kWh/msolid3L
186946 (N)HXCH FE180 E30-E60 3 x 2.5/2.532.5/2.514.1104 kg/km3060.72 kWh/msolid3L
187238 (N)HXCH FE180 E30-E60 3 x 16/16316/1621.3624.7 kg/km10281.63 kWh/mstranded3L
187239 (N)HXCH FE180 E30-E60 3 x 25/16325/1625902 kg/km14351.90 kWh/mstranded3L
187240 (N)HXCH FE180 E30-E60 3 x 35/16335/1637.31190 kg/km18042.20 kWh/mstranded3L
187241 (N)HXCH FE180 E30-E60 3 x 50/25350/2531.71723 kg/km24542.84 kWh/mstranded3L
187242 (N)HXCH FE180 E30-E60 3 x 70/35370/35362410 kg/km33513.52 kWh/mstranded3L
186985 (N)HXCH FE180 E30-E60 3 x 95/50395/5041.13296 kg/km44584.50 kWh/mstranded3L
186986 (N)HXCH FE180 E30-E60 3 x 120/703120/7044.54236 kg/km55385.30 kWh/mstranded3L
186987 (N)HXCH FE180 E30-E60 3 x 150/703150/7049.25100 kg/km67486.00 kWh/mstranded3L
186988 (N)HXCH FE180 E30-E60 3 x 240/1203240/12061.58242 kg/km109379.93 kWh/mstranded3L
186947 (N)HXCH FE180 E30-E60 4 x 1.5/1.541.5/1.514.181 kg/km2840.73 kWh/msolid3LN
186948 (N)HXCH FE180 E30-E60 4 x 2.5/2.542.5/2.515.1128 kg/km3520.82 kWh/msolid3LN
186949 (N)HXCH FE180 E30-E60 4 x 4/444/416.7200 kg/km4670.96 kWh/msolid3LN
186950 (N)HXCH FE180 E30-E60 4 x 6/646/618.1297 kg/km6251.13 kWh/msolid3LN
186951 (N)HXCH FE180 E30-E60 4 x 10/10410/1020.1504 kg/km8681.33 kWh/msolid3LN
186989 (N)HXCH FE180 E30-E60 4 x 16/16416/1623.4796 kg/km12531.70 kWh/mstranded3LN
186990 (N)HXCH FE180 E30-E60 4 x 25/16425/1627.21142 kg/km17522.20 kWh/mstranded3LN
186991 (N)HXCH FE180 E30-E60 4 x 35/16435/1629.81526 kg/km22182.56 kWh/mstranded3LN
186992 (N)HXCH FE180 E30-E60 4 x 50/25450/2534.82203 kg/km30503.41 kWh/mstranded3LN
186993 (N)HXCH FE180 E30-E60 4 x 70/35470/3539.53082 kg/km41384.18 kWh/mstranded3LN
186994 (N)HXCH FE180 E30-E60 4 x 95/50495/5045.24208 kg/km55165.58 kWh/mstranded3LN
186995 (N)HXCH FE180 E30-E60 4 x 120/704120/7049.15388 kg/km68796.37 kWh/mstranded3LN
186996 (N)HXCH FE180 E30-E60 4 x 150/704150/7054.36540 kg/km84187.83 kWh/mstranded3LN
186997 (N)HXCH FE180 E30-E60 4 x 185/954185/9559.88159 kg/km104939.55 kWh/mstranded3LN
186998 (N)HXCH FE180 E30-E60 4 x 240/1204240/12067.910546 kg/km1362912.00 kWh/mstranded3LN
187244 (N)HXCH FE180 E30-E60 7 x 1.5/2.571.5/2.516.1133 kg/km3940.94 kWh/msolid7L
187245 (N)HXCH FE180 E30-E60 30 x 1.5/6301.5/628.4499 kg/km12452.67 kWh/msolid30L
Additional dimensions available on request.