For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete, except for direct embedding in cast, rammed or vibrated concrete.
Also suitable for outdoor applications.
Permitted operating temperature at conductor of +70˚C.
Minimum bending radius permanent (multi core)
4 x D
Minimum bending during installation (multi core)
6 x D
Circuit integrity (FE180)
No
System circuit integrity
No
Installation temperature
5 °C - +50 °C
Operating temperature
-40 °C - +90 °C
Imprint
On request
Additional dimensions available on request.
Conductor
Bare copper, solid or stranded, IEC 60228 and EN 60228 (VDE 0295)
Insulation
Cross-linked Polyethylene, CENELEC HD 604 S1 and VDE 0276-604 "2XI1"
Core colours
CENELEC HD 308 S2, VDE 0293
Filler
Halogen-free compound
Shielding
Al-laminated tape with tinned copper drain wire
Outer sheath material
Polyolefin compound, VDE 0250-214 "HM2"
Smoke density
IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
Zero halogen no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA
Flame propagation
IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
Flame spread
IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2