Back to: MTP modules

HD-DCS MTP module, 1x MTPD on 12x LCD/PC, OM4

for HD-DCS modular panels

Description

Polycarbonate (PC) housing with press-fit cover (sealed).
At the rear these HD-DCS modules have one MTPD (duplex) coupler which is routed to the front couplers (2x 6LCD) by way of internal fanouts.
Front couplers with integrated, automatic transparent dust shutters.

  • HD-DCS MTP® modules are suitable for all high-density and high-performance applications with duplex signals, particularly in the data centre environment.
    They find modular application in the slots of the HD-DCS modular panels (19”/1U) in which they can be inserted from the front and the back.
    They are used to accept pre-assembled MTP trunk cables.
    Packing densities of up to 96 fibres on 1U are achieved with these modules.
    They are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
  • Acceptance capacity 24 fibres
  • Fully equipped Yes
  • Dust/Laser protection, backside Dust plug
  • Dust/Laser protection, frontside Inner shutter, translucent
  • Dust protection, backside Yes
  • Dust protection, frontside Yes
  • Fibre colour code IEC 60304
  • Laser protection, backside Yes
  • Laser protection, frontside No
  • As high-performance patch cables for high-density solutions Datwyler recommends the HD-DCS LCD Uniboot patch cables with push-pull rods.
  • Adapter colour, front side heather violet
  • Adapter colour, rear side magenta
  • Adapter material, front side Polymeric
  • Adapter material, rear side Polythermide
  • Adapter type, front side 6LCD
  • Adapter type, rear side Type A (key up/key down)
  • Adapter, front side 2 x 6LCD, heather violet (Inner shutter, translucent)
  • Adapter, rear side 1 x MTPD, magenta
  • Adapter, rear side MTPD
  • Connector colour, front side beige
  • Connector colour, rear side magenta
  • Connector type, front side LC
  • Connector type, rear side MTP12 female
  • Connectors, front side 24 x LC/PC 0°
  • Connectors, rear side 2 x MTP12 female Elite PC 0°
  • Ferrule material, front side Zirconia (ZrO2)
  • Ferrule material, rear side Polyphenylene sulfide resin
  • Ferrule polishing, front side PC 0°
  • Ferrule polishing, rear side Elite PC 0°
  • Fibre type G50/125 OM4
  • Insertion loss (IL), maximal, front side 0.25 dB
  • Insertion loss (IL), maximal, rear side 0.25 dB
  • Insertion loss (IL), typical, front side 0.15 dB
  • Insertion loss (IL), typical, rear side 0.15 dB
  • Number of adapters, front side 2
  • Number of adapters, rear side 1
  • Number of connectors, front side 24
  • Number of connectors, rear side 2
  • Number of fanouts (12F) 2
  • Return loss (RL), minimal, back side 35 dB
  • Return loss (RL), minimal, front side 35 dB
  • Return loss (RL), typical, back side 45 dB
  • Return loss (RL), typical, front side 40 dB
  • Sleeve material, front side Zirconia (ZrO2)
  • Housing, equipped with 2x 6LCD adapters with automatic transparent dust protection caps and ceramic sleeves on the front.
    Rear fitted with 1 MTPD adapters (Type A).
    2 module fanouts (HighP): each with 12 fibres, 1x MTP Elite® (female) on 12x LC (ceramic ferrules).
  • LC standard (IEC) IEC 61754-20
  • MTP standard (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32

Documentation

ENDENLFRCNESITAT
Datasheet Datasheet Datasheet Datasheet Datasheet file-icon Datasheet Datasheet Datasheet
Tender text file-icon Tender text file-icon file-icon file-icon file-icon file-icon file-icon

Versions

Article No.StockProductOuter dimensions (HxWxD)ColourMaterialWeight [kg]Packing unitGTIN
473500 HD-DCS MTP modules, 1x MTPD on 12x LCD/PC, OM439 mm x 100 mm x 120 mmblackPolycarbonate (PC)0.13 kg1 pc.40393910145465
MTP® and MTP Elite® are registered brands of US Conec.